SBP, 14x6 Rallyes - which kit

[BKCowGod]

Hi all -

I see a lot of different answers over the years. My Rallyes are 14x6. I am 90% sure they are the Coker/Wheel Vintiques/etc units. 4" backspace. Clearances are as follows, working from inside of wheel out:
13.25" for the first 2 inches, tapering down to 13" over the course of the next 1.5"
The last 1/2 inch tapers down to 12.25"

Assuming I don't want to change the wheels, which kit can I run? I like PirateJack and Dr Diff, but I like one that fits even better.

 

[BKCowGod]

I created a measurement tool!

13.25" goes down a hair under 3", then tapers from there

 

[autoxcuda]

Dr Diff 11" disk system will work with stock 14x6 rallye. Because his system is a same one Chrysler put on these cars originally. Stock spindle, disk, caliper.

Pirate Jack is also a stock 11" based system. Stock spindle, disk, caliper.

 

[BKCowGod]

Dr Diff 11" disk system will work with stock 14x6 rallye. Because his system is a same one Chrysler put on these cars originally. Stock spindle, disk, caliper.

Pirate Jack is also a stock 11" based system. Stock spindle, disk, caliper.

Thanks! Eric at PJ has been super helpful, will probably reward him then.