Show us your small block

-
340 in my 70 Dart Swinger, a detail work in progress :)
20240520_172348.jpg
 
I just got these pics from Brian @IMM last weekend. My W2 414 is going together!

1734349059556.jpeg

1734349119335.jpeg
 
I notice you have first gen plugs in the firewall/cowl area. Did they come that way on your Australian Mopar? I added them to my 67 Barracuda just so I could clean the area behind them - they were full of pine straw.
Yes, those plugs were used in Aus Chryslers right up to the finish of production in 1981.
 
The Jaundiced GT's original 120K mile 318 was rebuilt over the 2021-2022 winter. Ready for another 50+ years & 120K miles!

323 Borer.jpeg

Fresh Front.JPEG

Fresh Pass Side.JPEG

Fresh Drvr Side.JPEG
 
IMG_2224.jpg


408 Stroker that i purchased from here a while back, mocking up the motor mounts, next up I'm going to build an engine test stand, I want to fire it before it goes in the car.
 
Pump brand is Facet. No regulator and no issues so far. New mechanical pump failed after 2 months of usage so had to replace it.
 
Mine have been posted before elsewhere but here they are.

The 71 Demon 340 sporting his new Glen-Ray radiator for the 340.
20241002_204508.jpg


The avatar 72 Demon's 408.
20220721_204343.jpg
 
Just a little 318 with a cast 833OD I swapped into my '70 Swinger. Originally a slant and 904.
Engine (from '67 Coronet) and trans came from Jamie of Dead Dodge Garage. Cleaned em up a bit, painted, and she's about ready to rock! (Old pic, all accessories and radiator are installed now)

20240908_153022.jpg
 
-
Back
Top