[SOLD] Slant Six 400 HP Ram Clutch/Flywheel/Pressure Plate

[MidnightSwinger]

Installed but never run. Bought in December of 2023 from Summit Racing. Two small imperfections on the pressure plate face. It was like that when I got it from summit.

This is for the small register pre ‘68 crank, but it could be machined for the later crank.

Includes mcleod pressure plate bolts and ARP flywheel bolts. Save a few hundred $$$ and get a real clutch for your slant.

$575 picked up or $615 shipped from 95695 Woodland CA.

 

[MidnightSwinger]

The clutch and pressure plate will work for the small block early a application where you need the 9.5” clutch. The flywheel is slant six specific.

 

[RustyRatRod]

SO the clutch disc is a 9.5"?

 

[MidnightSwinger]

SO the clutch disc is a 9.5"?

Yes sir, and it’s rated to 450 HP not 400 like I originally stated.

 

[MidnightSwinger]

Open to offers, and trades. Building a 360 and looking for a solid cam, a higher stall torque converter etc… I also need a front sway bar for my 67 Barracuda.

 

[Strkr318]

Open to offers, and trades. Building a 360 and looking for a solid cam, a higher stall torque converter etc… I also need a front sway bar for my 67 Barracuda.

What all are you looking for trade wise ? I don’t have the three examples you gave

 

[MidnightSwinger]

What all are you looking for trade wise ? I don’t have the three examples you gave

That’s what I’m looking for, but if you have something in mind of equal value I’d be interested.

 

[MidnightSwinger]

$500 shipped

 

[MidnightSwinger]

Open to trades/partial trades and offers. It’s just sitting here.