69b7bbgts
Well-Known Member
Hello,anyone have any experience driving a slick shifted a833 on the street?
Cool, I have to see if it still has the syncro's in it, I know the sliders have been modified. How good does it power shift?I do it all the time and have for years.
The best thing to do is grind every other tooth off of the syncros and put them back in. That's how I do it. Shifts up and down like it has syncros. Because it does.
What's the liberty equalizer?my liberty equalizer a833 and 4.56 spool street and strip for 30 years like warm butter.
Cool, I have to see if it still has the syncro's in it, I know the sliders have been modified. How good does it power shift?
You mean you could power shift it without the clutch?
ramrod? You mean the shifterYou could downshift without the clutch with some throttle action, but I usually just half heartily tapped it while downshifting. Funnest ride I ever had and dearly miss it.
Yes,by power shifting I mean WOT. I'm thinking, even if you have a slick shifted tyranny you would have to use clutch. My car came with one and I pulled it out because I wasn't sure how it was going to act but this year I want to put it back in and drive it on the street and beat up on it at the track I'm using a diaphragm clutch with a 6 panel ceramic disc the car is an x super Stacker has a Dana and Ladder barsIf I may jump in here... Interesting thread btw... Thank you.
Definition of the word Power Shift?
What do you mean really?
Does it only refer to shifting at full throttle?
I mean you can Power Shift with or without engaging the clutch as you feel fit…
Paddle disc and super stockerYes,by power shifting I mean WOT. I'm thinking, even if you have a slick shifted tyranny you would have to use clutch. My car came with one and I pulled it out because I wasn't sure how it was going to act but this year I want to put it back in and drive it on the street and beat up on it at the track I'm using a diaphragm clutch with a 6 panel ceramic disc the car is an x super Stacker has a Dana and Ladder bars
Exactly what I thoughtYou cant powershift under load with out using the clutch. Try pulling your trany out of gear under throttle.
Yeah I got to get the side cover off that thing like I say I know the sliders have been modified I'm not sure if the synchros are still in there or if they have been modified I'll have it out of the garage and on the bench in another day or so and let you guys know what's in there thank you so much for all your replies
Yes I can I will try and get it on the form tomorrow thank youIf you can see brass the syncros are in there.
Can you post a picture?