[SOLD] Small Block Edelbrock Street Tunnel Ram with carbs

-
Status
Not open for further replies.
FastMopar71

FastMopar71

Well-Known Member
Joined
Feb 1, 2011
Messages
172
Reaction score
66
Location
Poconos - PA
Rating - 100%
1   0   0
Contact seller
For sale is a small block Edelbrock Street Tunnel Ram intake and matching Holley 9776 450cfm carbs. Comes with linkage bar, and bug catcher. Piece on top of one carb needs repair (see picture). Asking $950 plus shipping or local Eastern PA pickup.

IMG_7270.jpg
IMG_7271.jpg
IMG_7272.jpg
IMG_7273.jpg
IMG_7274.jpg
IMG_7275.jpg
IMG_7276.jpg
IMG_7277.jpg
IMG_7278.jpg
IMG_7279.jpg
 
Actually, you are wrong about that. That is a “street tunnel ram” and the difference between it and the standard tunnel ram is the depth of the top plenum. If you take the carbs off it will say “street tunnel ram” right on top of the plenum. And yes the STR12 is a completely different animal. I’ve got both and I can do a side by side comparison photo if you need one. Not trying to highjack the sale thread here but if you want pictures PM me. The “street” version like this is a lot harder to find.
 
hemichuck said:
Actually, you are wrong about that. That is a “street tunnel ram” and the difference between it and the standard tunnel ram is the depth of the top plenum. If you take the carbs off it will say “street tunnel ram” right on top of the plenum. And yes the STR12 is a completely different animal. I’ve got both and I can do a side by side comparison photo if you need one. Not trying to highjack the sale thread here but if you want pictures PM me. The “street” version like this is a lot harder to find.
Click to expand...

Thank you hemichuck for clarifying..you are correct. This definitely says street tunnel Ram on top :)
 
FastMopar71 said:
... Piece on top of one carb needs repair (see picture)...
Click to expand...

I cannot see that piece as it is taped up. Can you tell me or show me the repair required or is that carburetor toast? What happened to it? Thanks.
 
DC 340 said:
I cannot see that piece as it is taped up. Can you tell me or show me the repair required or is that carburetor toast? What happened to it? Thanks.
Click to expand...

The base of this post cracked in shipping..see picture. It can be repaired, definitely not toast.
upload_2021-7-24_23-23-19.jpeg
 
Can you get a better picture of the plenum from a direct side shot?
 
FastMopar71 said:
It’s packed away at the moment. What exactly are you wanting to see? Are you seriously interested in purchasing?
Click to expand...

I'm not, but I know someone who might be if it has the right top. You can just tell me. Is it the top that looks all blowed up like a balloon?
 
Status
Not open for further replies.
-

Back
Top