small block LA Mechanical Solid Lifters recommended

-
Jax

Jax

FABO Gold Member
FABO Gold Member
Joined
Nov 6, 2009
Messages
304
Reaction score
69
Location
Aruba
I am looking to buy the best recommended solid lifter for my application.

The cam is a hughses grind with .600 lift. Heads are equipped with pac springs. I am looking to buy solid lifters no oil trough and that have the small orifice to supply lubrication to the cam lobe... What brand and part number do you recommend me.

Thanks
 
Thanks Guys will go for it..... Any recommendations on push rods brands????
 
Jax said:
But these are oil trough..... I want to use non-trough oiling to avoid any oil leakage between the lifter cup and the pushrod. I am not going to use pushrod oling.
Click to expand...

My bad. I thought you were wanting PR oiling and I have a set of those.
 
Manton pushrods, Smith bros pushrods.
Also comp cams, trickflow etc. etc.
If it's made of chromoly ( at least .080" wall thickness) it's good enough for most street/strip cars.
 
You must log in or register to reply here.
-

Back
Top