[WANTED] small block stroker

[glorydays]

Looking for a real nice small block stroker preferably assembled and running. I don't have time to wait it's summer. Please be a streetish motor and be fast as hell! Have cash but I also have a limit.. thanks jr

 

[RichardJ916]

408 Cubic Inch Mopar Small Block
Another Bad *** Creation
691+ Horsepower, 630 ft. lbs. of Torque
360 Mopar Block, Main Girdle, Double Keyed 4340 Eagle Steel Stroker Crank, Aftermarket Double Keyed Balancer, H-Beam Steel Rods, 8.5 to 1 Compression JE Forged Pistons, File Fit Speed Pro Moly Rings, H Series Rod and Main Bearings, Melling High Pressure Oil Pump, Moroso Oil Pan and Pickup, Polished Edelbrock Aluminum Heads, ARP Head Bolts, Comp Cams Shaft Roller Rockers, Stainless Steel Valves, Comp Cams Springs, Chrome Moly Retainers and Locks, Comp Cams 663/648 Billet Roller Cam and Lifters, Double Roller Timing Chain and Gears, BDS Polished Blower Intake, Blowershop Billet 671 Supercharger, 3 Inch Drive Pulleys and Belt, Funnycar Style Beltguard, Pair of Holley Boost Reference 750 Blower Carbs, Linkage, Fuel Lines, Polished Dual Carb Scoop with K&N Filters, Mallory Electronic Distributor, Waterpump with Overdrive Waterpump Pulley, Set up, Run, Synchronized and Dynoed.
$15,650.00 Turn/Key #619​

 

[physixx]

I have this 360-408 ready to go if you're interested.

BLOCK IS .030 OVER
CLEANED, BORED, HONED AND NOTCHED FOR ROD CLEARANCE
CASTING DATE 12-4-75
NEW KB .030 OVER FORGED PISTONS
NEW TOTAL SEAL .030 OVER MOLY RINGS
NEW INTERNALLY BALANCED SCAT CAST STEEL CRANK STD/STD
NEW SCAT I-BEAM RODS
NEW CLEVITE CAM, ROD AND MAIN BEARINGS
NEW BRASS EXPANSION PLUGS
NEW SUMMIT .480/.480 LIFT HYD. CAM AND LIFTERS # SUM-1798
FINNED ALUMINUM VALVE COVERS PAINTED WRINKLE BLACK
NEW MELLING HV OIL PUMP AND PICKUP
NEW KEVKO EXTRA CAPACITY OIL PAN AND PICKUP
NEW POWER FORCE HARMONIC DAMPER
NEW CLOYES FULL ROLLER TIMING SET
"X" HEADS W/BRONZE GUIDES, CRANE SPRINGS
HARDENED VALVE SEATS AND NEW STAINLESS 2.02/1.6 VALVES
HEADS HAVE BEEN POCKET PORTED
FACTORY TYPE ADJUSTABLE ROCKER ARMS
CUSTOM PUSHRODS FROM SMITH BROTHERS PUSHRODS
MSD BILLET ALUMINUM DISTRIBUTOR #8534
EDELBROCK TORKER II 340 INTAKE #5076
REMANUFACTERED WATER PUMP
ACCEL WIRES AND NEW CHAMPION SPARK PLUGS
LATE STYLE TIMING COVER
COMPLETELY ASSEMBLED & PAINT HEMI ORANGE
REBUILT 750 HOLLEY DOUBLE PUMPER CARB

$4,750.00

plus shipping from Edison, NJ 08820
I can also help with shipping arrangements,
crating and delivery to truck terminal for a small fee



Ken
Edison, NJ