Source for A-body 8 3/4 10x1.75 brake drums?
- Thread starter 1966Post
- Start date
-
HemiSSDart
Dartus Interuptus
1969 DODGE DART 6.3L 383cid V8 Drum | RockAuto
RockAuto ships auto parts and body parts from over 300 manufacturers to customers' doors worldwide, all at warehouse prices. Easy to use parts catalog.
www.rockauto.com
Rock auto still lists them, are they out?
Summit.
These are for 10x1.75 Small bolt pattern A body 8 3/4 or 7 1/4
These are for 10x1.75 Small bolt pattern A body 8 3/4 or 7 1/4
They should not be refered to as 10x2 as there are 10x2 brakes out there (C body IIRC) always refer to the shoe size. Yes the drum friction surface will be wider than the shoe size, but brakes are not specked by the friction surface
Maxxicek
Member
Both sets I ordered from Rock Auto and Summit were very wrong, looked more like something that went on a half ton truck. Hope you have better luck than I did.
I had a problem with my 1st order from summit, but their customer service was amazing and in the end I got 3 sets that I ordered and all 3 were correct.
FlamesAreWicked
Well-Known Member
Ordered a pair that’s due to arrive Tuesday from Summit, I’ll report back on what arrives
If ya search for a 67-69 Barracuda they show they fit.. but if ya look it up for a 67-69 Dart, says that it doesn’t.. an odd mess up with their info
If ya search for a 67-69 Barracuda they show they fit.. but if ya look it up for a 67-69 Dart, says that it doesn’t.. an odd mess up with their info
FlamesAreWicked
Well-Known Member
They arrived today and measured out as 5x4 so.. looks like it’ll be a good source for 8 3/4 A-body brakes..
Did you check the ID. be sure they are not 9"
FlamesAreWicked
Well-Known Member
score!
FlamesAreWicked
Well-Known Member
I’m guessing these are the correct ones for the front ? I may just get a pair of those too..
Thanks for confirming!
-
