71scamp78
Well-Known Member
Contact seller
I have a nice set of Speed Pro heads done up by Mike at Mrl. I believe they were 2.08 intake and 1.60 exhaust and flowed 275 cfm at .600 lift with 63 cc chambers. They were set up for my stroker engine with a roller cam and have about 1.5 hours of run time on them . Engine has wrong rings and is coming apart so I decided to scrap project since I was gonna sell anyways. I paid 1950.00 shipped for these heads and they have Mike's stage 2 porting very nice heads. If you need any confirmation on these I'm sure you can call Mike at MRL Performance. I'd like to get 1500.00 shipped since basically new car was never driven on broke in. Located in Terre Haute Indiana. I also have Hughes Engines aluminum roller rockers and shafts. Believe these are 750.00 a set I'd like 500.00 shipped again 1.5 hours run time only. Parts still bolted to engine will need disassembly . Thanks guys