Starting my Early-A Conversion to disc

[chewy]

Thank you again!

View attachment 1716222091

View attachment 1716222092

@MidnightSwinger I ran my master lines to the outside of the clutch pedal linkage. Took a little coaxing. Not sure if correct. It made it easier to get the torque shaft in place. Works just fine and clears well.

Which line from the new tandem master goes to the rear brakes? Or does it matter?

The hole to the rear of the block. goes to the rear brakes.

 

[66Valiant528]

@MidnightSwinger I ran my master lines to the outside of the clutch pedal linkage. Took a little coaxing. Not sure if correct. It made it easier to get the torque shaft in place. Works just fine and clears well.
View attachment 1716222149


The hole to the rear of the block. goes to the rear brakes.

Ya but which port on the master? Probably doesn't matter on my 4 wheel drum master .

 

[chewy]

Ya but which port on the master? Probably doesn't matter on my 4 wheel drum master .

The one closest to the firewall connects to the rear brakes, and the front connects to the front brakes.