Steering column advise

-
F

Fittrjoe

Well-Known Member
Joined
Jan 29, 2022
Messages
77
Reaction score
40
Location
Spokane
67 Barracuda automatic with shifter in console
I want to replace my steering column with a reconditioned one IE; new bushings and bearings.
Not really up for reconditioning mine.
Any recommendations?
I wanted to ask here first before poking around on EBay and other places
Thanks
 
After Market power steering Borgeson
Is 67 larger in Diameter?
Will a 68 69 work if I swap entire unit?
 
"Reconditioned" on Ebay? unlikely. There is a small bearing at the top of the column and a bushing/bearing at the bottom, easily replaced. Cost= $40.
 
Murray said:
"Reconditioned" on Ebay? unlikely. There is a small bearing at the top of the column and a bushing/bearing at the bottom, easily replaced. Cost= $40.
Click to expand...
Thanks
Looks like I’m gonna attempt it.
I can feel them goin bad
 
It is not hard to redo your 67, then you know there will be no surprises. Doing one now for my brother's 67. I know where you can get all the parts. let me know if you want to go that way, and I'll post links.
 
66fs said:
It is not hard to redo your 67, then you know there will be no surprises. Doing one now for my brother's 67. I know where you can get all the parts. let me know if you want to go that way, and I'll post links.
Click to expand...
Thanks man
I might take ya up on that
Trying to source a reconditioned 68 from Norms or anywhere else first…
I’ll let ya know.
 
66fs said:
I know where you can get all the parts. let me know if you want to go that way, and I'll post links.
Click to expand...

I'd greatly appreciate it if you could post those links for a '67 column. I'm having trouble finding a lower column bearing and retainer for a '67 4-speed Barracuda. Thanks.
 
Capecodcuda said:
I'd greatly appreciate it if you could post those links for a '67 column. I'm having trouble finding a lower column bearing and retainer for a '67 4-speed Barracuda. Thanks.
Click to expand...
I’m not going to rebuild my one year only 67
I’m going with a reconditioned 68 from Norms
Check with Bergman Auto Craft BAC.
 
I was going to rebuild my 67 column, however my column was wasted on the bottom, both the shaft and outer housing.
Got a rebuilt 68 column from Norm's, very nice piece.
He had a 67 as well, but I went with the 68, doesn't look any different unless you know or care, not sure if it is a better design.
 
You must log in or register to reply here.
-

Back
Top