Steering column brain fart

-
MrJLR

MrJLR

Built, not bought
FABO Gold Member
Joined
May 14, 2015
Messages
5,626
Reaction score
6,731
Location
Menifee, California
Installing my steering column in my 68 Barracuda and should have took pics....now it's been awhile and I can't remember where/how this odd washer goes!

20160506_062901_zpss00h8azt.jpg


There are 2 of them.
I went through the service manual. ..no luck...
Any help?!!!

Thanks

Jeff
 
underneath - I believe they hold they whole shebang up - two threaded rods that are on either side of the column about 1/2 to the firewall - the right one also has a ground that goes to it
 
ScampMike said:
underneath - I believe they hold they whole shebang up - two threaded rods that are on either side of the column about 1/2 to the firewall - the right one also has a ground that goes to it
Click to expand...

Ok....they go on the 2 studs hanging down. ....thanks!
 
I always just throw the left over parts away..... :lol:
 
I do not recall the correct sequence.. Google duster steering column and go to images.. for me the 6th one over was a schematic - it might help
 
Last edited:
Ok...it's in and done.....those 2 washers went on the 2 front studs and up against the plastic "slip-off" parts.

Thanks guys!
Now.....starting the front end rebuild! !!!!!!!

Jeff
 
You must log in or register to reply here.
-

Back
Top