[FOR SALE] Stock J heads and 340 Torker Intake

[doogievlg]

I’m selling a set of factory J heads and a edlebrock 340 Torker intake. Both came off a 360 that was in a motor home and I ran both for 6 years before removing them in 2014. The heads will need to be cleaned up as they have sat on a self since 2014 along with the intake. I’m looking for $250 for the heads and $100 for the intake. Located in Cincinnati and I do not want to ship these items.

 

[Jim Ward]

1.88 intake valves or 2.02?

 

[doogievlg]

1.88 intake valves or 2.02?

1.88 unfortunately

 

[doogievlg]

Not sure what the rules are about this but the parts are still available. Going on Facebook market place this weekend though.

 

[MOPAROFFICIAL]

Factory 2.02 J's flow better than your average 1.88 heads with a 2.02 just cut in. The bowls are sized drastically different. Fyi
Set of REAL 2.02 915 j heads can flow around 230cfm
Mine flow 228, with exceptional lower lift numbers-AS CAST.
Heads with just a 2.02 cut in...flow maybe 200-205cfm.
Never assume.