Shower time. I have parts to ship and while I am downtown I need to stop at the Sportsplex and walk for an hour.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
MomsDuster
Well-Known Member
If I was closer, I’d be there!
zkx14
Duster De-ruster
I guess I am closest, but still pretty far. And, it's back to work day.
I am considering leaving mine Patina but it has a few holes. Missing some door and window parts
zkx14
Duster De-ruster
Just vacuumed about a gallon of water out of the drivers side of the Duster. We had some heavy rains over the last couple weeks so it was expected. I can't say for sure if any leaking from front, but definitely most from the door seal. Been working on clearing the garage to get it in and dry it out. Not sure how long it will stay in there. Probably be back out with the cover on for at least part of Winter. Try to keep her car in garage so we always have one vehicle that can be a driver on short notice and hers is the preferred option for snow. Really should get another 4 wheel drive - miss the Magnum big time on those days...
dukeboy440
Well-Known Member
0600 here
dukeboy440
Well-Known Member
some of us can still reach that far lol
Patina stays on outside. Want inside clean.
Good morning from the oil field. Remember November 4th is take your gun to work day.
There is no one in the Hood to help me with the Hood. Maybe when my tenant comes home. He's a strong little Army LTC.....
Good idea. Maybe I will copy you. Mine will not be as nice I am sure
Wrap the hood in a blanket to protect it and lift it with the engine crane. I have done that before but not one that I did not want to Mark up
I can't
dukeboy440
Well-Known Member
November 4th May be the start of the next phase of this country’s history too... that being a repeat of the 1860s... just going off the fact that the Guard is on standby, myself included, and cities all over are boarding up their windows and preparing for wide spread unrest.
Liquidated all my positions into cash, on Friday at the end of the day. Still in all of my accounts though. Will see what happens tomorrow. But at least my Money aint Skeered.....
dukeboy440
Well-Known Member
Smart move. I should do the sameLiquidated all my positions into cash, on Friday at the end of the day. Still in all of my accounts though. Will see what happens tomorrow. But at least my Money aint Skeered.....
I liquidated all my positions, into beer!!!!
AND Ammo....
dukeboy440
Well-Known Member
There was a budget for that alreadyI liquidated all my positions, into beer!!!!
After Nov. 4, I will still be here doing the same **** I'm doing now.
Get up and go to work in a rush
Listen to stupid people all day and just wait for quiting time.
Get through traffic on the way home
Thourghly entertain myself with a 30 minute bathtub monolog.
Dry my hair for another 30 minutes while singing and using the hair brush as a microphone.
Then go spend 20 minutes giving the cat attention.
Then get on the internet and see what's going on in faboland and watch YouTube videos about other people's cool lives.
Then fall asleep on the couch and repeat tomorrow.
Get up and go to work in a rush
Listen to stupid people all day and just wait for quiting time.
Get through traffic on the way home
Thourghly entertain myself with a 30 minute bathtub monolog.
Dry my hair for another 30 minutes while singing and using the hair brush as a microphone.
Then go spend 20 minutes giving the cat attention.
Then get on the internet and see what's going on in faboland and watch YouTube videos about other people's cool lives.
Then fall asleep on the couch and repeat tomorrow.
Last edited:
A blessed life for sure.
Wow this is B/S. I bought an engine a few years back. Put together by a couple of stock car hacks. I had someone interested in these valve covers and I thought I better investigate the breathers. They fricken ruined the covers. They drilled out the grommet holes with a hole saw to install their K&N breathers. They were so stupid, they siliconed them in and pretty much blocked the breather openings with the baffle plates. Oh, did you notice the baffles were upside down so they collected oil? 
dukeboy440
Well-Known Member
OuchWow this is B/S. I bought an engine a few years back. Put together by a couple of stock car hacks. I had someone interested in these valve covers and I thought I better investigate the breathers. They fricken ruined the covers. They driller out the grommet hiles with a hole saw to install their K&N breathers. They were so stupid, they siliconed them in and pretty much blocked the breather openings with the baffle plates. Oh, did you notice the baffles were upside down so they collected oil?
View attachment 1715623851
View attachment 1715623852
View attachment 1715623853
View attachment 1715623854
View attachment 1715623855
Wow this is B/S. I bought an engine a few years back. Put together by a couple of stock car hacks. I had someone interested in these valve covers and I thought I better investigate the breathers. They fricken ruined the covers. They drilled out the grommet holes with a hole saw to install their K&N breathers. They were so stupid, they siliconed them in and pretty much blocked the breather openings with the baffle plates. Oh, did you notice the baffles were upside down so they collected oil?
View attachment 1715623851
View attachment 1715623852
View attachment 1715623853
View attachment 1715623854
View attachment 1715623855
Those had to be Chevy guys.
Oh ya!
I will be honest, pics look way better. Im making it “good enough”
Just placed an order for window felts and some odds and ends. $155 us. Tack on another hundred for exchange and shipping. Then the glass will roll up and down-not rattle.
-
