Stop in for a cup of coffee

-
Speaking of that I best quit running my mouth and run my gun. I am T minus 10 for my go fast pistol event. I cannot wait for this one to be done. It is difficult to practice a technique you fundamentally do not agree with. But I will get thru it and be a better instructor to my students as a result. In the end that is my only true objective. I have not “looked” my magazine into the gun in about a million years. But if that is the way he wants it done I will do so for the two days I am under his tutelage.
 
Day went better then it started.
Pull in to gas up.
Debit card declined, toss in credit card declined.
Try calling and driving on the turnpike to find out the problem.
Two different cards from different banks both hacked.
Second time on credit card in 6 weeks 3rd time on debit card in 2 months.
 
Old man ray said:
Day went better then it started.
Pull in yo gas up.
Debit card declined, toss in credit card declined.
Try calling and driving on the turnpike to find out the problem.
Two different cards from different banks both hacked.
Second time on credit card in 6 weeks 3rd time on debit card in 2 months.
Click to expand...
Damn
 
I will say this for a heavy vehical the Escalde gets good milage.
I had to keep it below 85 or it would go over 2k on the rpms
 
Mopar Tim said:
Much easier to learn on thick, clean steel......:thumbsup:
Click to expand...
Thats what i showed him . He struggled a bit on sheet metal , but he was going in the right direction..
His set up just wasn't going to cut it.
My mig is a flux core only good for outside use. No worry about wind blowing the gas away.
 
Old man ray said:
I will say this for a heavy vehical the Escalde gets good milage.
I had to keep it below 85 or it would go over 2k on the rpms
Click to expand...
Seems to be the key. My old Buick 3.8 can get mid 30's hwy. if I drive it right.
 
Old man ray said:
Thats what i showed him . He struggled a bit on sheet metal , but he was going in the right direction..
His set up just wasn't going to cut it.
My mig is a flux core only good for outside use. No worry about wind blowing the gas away.
Click to expand...
I do a lot of outside welding, flux core.....
 
Mopar Tim said:
I do a lot of outside welding, flux core.....
Click to expand...
I picked this up last year. To the door $225.00
Weighs 14 lb with a small spool.
140 machine 110 volts.

20220430_185358.jpg


20220430_185352.jpg
 
Well here is my welding rigs that are still in Fargo. Most of my junk is already in Arkansas in preparation of our retirement. The other pix are simply because I am out in the shop getting tuned up to some Kenny Wayne Shepard who is here live in Fargo tomorrow! That kid can play!

80BC2EE9-C684-4810-A327-D5D3FCFB24C4.jpeg


8470CD88-755C-4067-A393-D4553B85CB51.jpeg


A23CD95D-C277-44BF-8781-B526307FBC1C.jpeg
 
And I had to rearrange the parking this weekend. And of course while Jodi is in Arkansas why not use her baking pans for reloading. My neighbor wants to reload some 30-06 for a elk hunt this upcoming winter so I am getting his brass sorted out. Cheryl if you are lurking don’t throw me under the bus! Hah!

CE24ED65-8F47-45D5-AFFB-1D11340107EE.jpeg


2C76BB90-BBCE-461D-A22E-46564F5824C0.jpeg


B0215838-C8C5-43B1-BEF6-5CED90C0812C.jpeg
 
You must log in or register to reply here.
-

Back
Top