Stop in for a cup of coffee

-
It's Sport Sunday!
2050598-1973-dodge-dart-sport-std.jpg

Good morning :D
 
Looks like I need to take a ride to a more elevated portion of the valley this evening if I want to see any part of that eclipse. Moon will be just coming up during it's bloodiest stage. Those astronomic events just fascinate me.
 
Late morning!
Cloudy and cool today.
Had to bust a move early to get to swap meet. Was very busy, lots of stuff. Saw a 8bbl la intake with carbs. Not my cup of tea so i didnt even ask. Then off to see Mom. 200 ish miles between home, city and stop at care home.
 
Good morning all. Second part of the roadtrip is up now.


You have a great attitude esp. considering all the white knuckle driving. I'm about to drive from Metairie LA to Oak Harbor WA, trying to decide whether to go up Colorado or over to Utah, close to same miles.
 
Made it home. Gas gauge crapped out. Not a biggie, as long as its not the sender.
 
Went to a stamp sale this morning near Lancaster PA. Got a few good buys. Got most of the floor down. Grabbing a bite to eat (chicken parm sub and breaded shrooms) then will set toilet on. Need to figure out a few things on new sink and shower before I do any more flooring. Just gonna tape down edges till then. I got 5 cases to be sure I had enough, but so far have used a little less than 3. Should be able to return one. :thumbsup:(Pergo- $67.60/case :eek: )

2C952EA1-E52A-44CC-82A5-8741CC1FF68A.jpeg
 
Went to a stamp sale this morning near Lancaster PA. Got a few good buys. Got most of the floor down. Grabbing a bite to eat (chicken parm sub and breaded shrooms) then will set toilet on. Need to figure out a few things on new sink and shower before I do any more flooring. Just gonna tape down edges till then. I got 5 cases to be sure I had enough, but so far have used a little less than 3. Should be able to return one. :thumbsup:(Pergo- $67.60/case :eek: )

View attachment 1715928040
That looks great.
 
OMG Katy Perry is gorgeous. Watching her on American Idol.

America!

katy-perry-presidency.jpg
 
Man I’m feeling it. 12 hours in a car driving yesterday, my back is killing me. This despite the Durango being super luxurious. I must not have had the seat right or something.

makes me wonder going forward about the comfort level of the challenger srt8 seats in the Dart.
 
Man I’m feeling it. 12 hours in a car driving yesterday, my back is killing me. This despite the Durango being super luxurious. I must not have had the seat right or something.

makes me wonder going forward about the comfort level of the challenger srt8 seats in the Dart.
I put ford Taurus seats in the 66. Drivers fully adjustable. Electric...
 
Well finally a quiet evening, training is all complete for the week. I am going to unwind tomorrow and start the long drive back to Fargo on Tuesday. Attached is some pix from our drone of yours truly teaching a Church security Team at our new facility. Blair Creek Training Center. It was a very special day and I was humbled to be able to teach these men as they try so diligently to keep their congregation safe.

77A5037D-B41E-49D1-8A74-0C1BE0F07D6B.jpeg


916F8665-5605-4F51-B664-F5D0044C9483.jpeg


CB55F25D-8296-44E3-BFB9-6534C54A75AB.jpeg


27103CB5-6E22-41E9-9EA7-A2A140263C01.jpeg


1F91D2CF-CA1A-4591-B388-3D05FFCF8BC9.jpeg


B8BCB898-3F03-45C2-AF77-4AABBC7752E6.jpeg
 
Good afternoon!

The past three days have been "fun"

Friday, I was leaving school to go to work in the duster and it missed once. That's not usual and I smelled something different. When I pulled over and checked I found that my coil had split open and leaked all over the intake. Brand new edelbrock coil about 6 months old. great. Called dad and he brought the coil off the slant 6 and my some tools. Got to work about an hour late all told but It ran perfect the whole time with the slant coil on it. made it to work, then to the school event after until 11. that was a 21 hour day.
Yesterday, I went to a friends house with a shop and we went and got an MSD Blaster 2 coil for it. wrapped it in heat tape, he had one of those chrome coil dress up things we painted black and heat taped, and put it on.
In neutral, it revved fine and didn't skip a beat. When driving, it kept missing almost every second and ran like crap. Barely got it home and it ripped that POS outta there.
Today, I ordered an ACCEL super stock coil and it'll be here tomorrow. Went around looking for yard sales and I found a sun X-44 timing light.
PXL_20220516_024506003 (1).jpg

PXL_20220516_024522142 (1).jpg

@halifaxhops any year guesses? I couldn't find anything

Then I got this top box made by Aero Industries I'm almost done refreshing and straightening then it'll be cool.
PXL_20220516_024440720.jpg
 
Good afternoon!

The past three days have been "fun"

Friday, I was leaving school to go to work in the duster and it missed once. That's not usual and I smelled something different. When I pulled over and checked I found that my coil had split open and leaked all over the intake. Brand new edelbrock coil about 6 months old. great. Called dad and he brought the coil off the slant 6 and my some tools. Got to work about an hour late all told but It ran perfect the whole time with the slant coil on it. made it to work, then to the school event after until 11. that was a 21 hour day.
Yesterday, I went to a friends house with a shop and we went and got an MSD Blaster 2 coil for it. wrapped it in heat tape, he had one of those chrome coil dress up things we painted black and heat taped, and put it on.
In neutral, it revved fine and didn't skip a beat. When driving, it kept missing almost every second and ran like crap. Barely got it home and it ripped that POS outta there.
Today, I ordered an ACCEL super stock coil and it'll be here tomorrow. Went around looking for yard sales and I found a sun X-44 timing light.View attachment 1715928198
View attachment 1715928199
@halifaxhops any year guesses? I couldn't find anything

Then I got this top box made by Aero Industries I'm almost done refreshing and straightening then it'll be cool. View attachment 1715928200
Your using a ballast resistor right?
 
-
Back
Top