Stop in for a cup of coffee

-
Be a fun day to be out in the old home land dunes buggyin today :steering: Radar says scattered T-Storms in many areas of the Mojave :D Love the smell of impending rain on the desert
 
Mattax said:
Probably not wire harness if its all of them. IVR or connection to IVR (fuel gage) will effect the Fuel, Temp and Oil Pressure. Poor connection on the board or weakenss will be just Temp & Oil pressure. That was the only real issue on my board.
Try to do some diagnostic before he comes. IVR surgery will be a different project.

The 1966 Master Tech filmstrip and movie cover the gages real well, and pretty easy to understand.
Some links here: Rallye Instrument cluster voltage limiter - 68 Barracuda

If you do have to replace the IVR, read up on @RedFish's posts on the subject.
Click to expand...
Replaced the IVR and got it from Redfish. He is the man!!
Replaced the circuit board a couple years ago so that's good.
We've had the dash apart recently and it just looks bad.
I'd rather replace it and have John help. He's forgotten more about my Barracuda than I know.
He's bringing a couple dash gauges to replace, and everything needed.
I just pay his ride and feed him Mexican and BBQ while he's here it's a win win!!.
 
Home had a great day with Cheryl.
We started the day going to our favorite small town 100-year-old diner for breakfast.
Then we went and played some golf.
Home for a toddy or two and then going to go check out the local cruise night and dinner.
A perfect day!!
 
MOPARMITCH said:
On Beer number three......
Click to expand...

Tigers?

20220730_144320.jpg
 
Prep day today... I did pull the back seat out to check on the body plugs and a spot that's going to need some patching. Going to get it up on jack stands for the trans filter replacement and cable adjustment tomorrow. I may set my brother to work on the carb while I mess with the transmission.
 
No pics yet, but the bathroom project is finally coming together. Linen cabinet is in. Still need to put the doors and a piece of trim on, plus shellac the shelves. Vanity is in and sink hooked up. Today's big pain in the butt turned out to be the mirror. Put up with 4 toggle bolt anchors. 2 of them were hitting something. ??? looked flat through the half inch hole. I'm like :wtf:. Thought someone left something in the wall. lol. Turned out to be the vent pipe. I completely forgot that was in there. Was able to flex it sideways and use shorter bolts. Which actually worked out great, because the ports I picked up at Ace are truss head and hold the mirror better than what came with the anchors.:thumbsup:
 
I usually cook a whole pack, and refrigerate what I don't use immediately. Extra Don't stay long in the Fridge......:lol:
 
Well sounds like I’m in the dog house tonight. May as well come here and hide out with you all
 
You must log in or register to reply here.
-

Back
Top