Well I'm going out to box up the 318 to pass off to Tim at Carlisle.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
It's going West?
Good question
AC!!!
Off to ride in the rodeo aka fireworks parade…
One thing to note, heater cores for these D/W trucks are next to impossible to find right now. Add AC in to the requirement and you have a better chance of finding a fully restored 1 of 7 71 hemi cuda convertibles in a barn on your property
No same Tim
We talked about rebuilding his engine.
Nice
Too bad it's a 65 under-dash
www.forabodiesonly.com
Anyone validate this information here? @Mattax... @Mopar Tim
www.forabodiesonly.com
[SOLD] - 1965 Dart Parts. Wiring Harness, heater box rebuild kit, insulation. Some 63-66
63-66 Hood to cowl seal, new from classic. SOLD!!! New 63-66 black arm rest front, pair $50 1965 Dart Under Dash wiring harness from year one $675 1965 Dart Rear Lamp harness from year one $160 63-66 heater box rebuild kit and kick panel insulation kit. Both from DMT SOLD!!!! All prices do...
www.forabodiesonly.com
Anyone validate this information here? @Mattax... @Mopar Tim
1964 Dart Bulkhead Connector
Does anyone have a '64 Dart that can get a good photo of the bulkhead connector under the hood? I am trying to decide if I can use '64 harnesses in my '63 since M&H makes them for the '64 (V8 only but stretching wires with a soldering iron and shrink tubing is easy). Thanks, Jim
www.forabodiesonly.com
5 they say...
I sent you and the builder a pm.
I love the horse track...
Ummmm…no!
That’s the best scrapple around in my opinion. Lots of spice. I don’t like when it’s bland.
Doing my best Dave impression, by doing a copy and post, and pretending I knew all along.
a horse can do 33,000 foot-pounds of work per minute which was how a single unit of horsepower was contrived.
Now I need to go look up the formula for Work
W = F × d × cos(θ)
Where:
- W is the work done (in Joules, J)
- F is the force applied (in Newtons, N)
- d is the displacement of the object (in meters, m)
- θ is the angle between the force and the displacement vectors (in degrees
I will tell you anyone who says we'll I was whipped with "whatever" and it was worse then a hot wheels track has never been beat with a hot wheels track.Where's that hotwheels track??
-
