MomsDuster
Well-Known Member
Quite possible!
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
dukeboy440
Well-Known Member
from a moparts ad. good GAWD
"I have for sale a complete Aluminum Front end for either a 1964 Dodge 330 or 1964 Dodge 440 Max Wedge car. Listed below are all the parts that I have to make up the 1964 Dodge Aluminum Front end.
1 - 1964 Dodge Max Wedge Aluminum Hood; Can be Modified for HEMI
1 - Pair 1964 Dodge Aluminum 330 Fenders
1 - Pair 1964 Dodge Aluminum 440 Fenders
1 - Aluminum Tie Bar/Hood Latch Support; links the Fenders
1 - Aluminum Grill Support; Located behind the Grill
1 - Set Aluminum Bumper Brackets & Supports
1 - Thin Steel Front Bumper Straightened and Chromed
1 - Aluminum Max Wedge Hood Scoop
1 - Aluminum Race HEMI Hood Scoop
1 - Very Rare 1964 Dodge Aluminum Stone Guard
I do not have the Aluminum Doors found with the 330 HEMI cars.
The price will depend on what configuration you wish to purchase, and the condition of the parts. I will offer the buyer the option of purchasing all the 1964 Dodge Aluminum I have.
The buyer will need to pick the 1964 Dodge Aluminum up, as I will not ship the Aluminum.
I will offer the complete package of 1964 Dodge 330 or 440 Aluminum for $30,000 obo. Note: The HEMI configuration will be more expensive.
It should be clear some of the Aluminum will require repair and straightening. For those who have worked to assemble a complete Aluminum Front End, they know this is an expensive and time consuming process. There are those who do fabricate 1964 Dodge and Plymouth Aluminum Front Ends. However, there will be substantial time and money associated with going that route.
If you have questions and want pictures, you may contact me via email at [email protected]
Thanks
Peter"
"I have for sale a complete Aluminum Front end for either a 1964 Dodge 330 or 1964 Dodge 440 Max Wedge car. Listed below are all the parts that I have to make up the 1964 Dodge Aluminum Front end.
1 - 1964 Dodge Max Wedge Aluminum Hood; Can be Modified for HEMI
1 - Pair 1964 Dodge Aluminum 330 Fenders
1 - Pair 1964 Dodge Aluminum 440 Fenders
1 - Aluminum Tie Bar/Hood Latch Support; links the Fenders
1 - Aluminum Grill Support; Located behind the Grill
1 - Set Aluminum Bumper Brackets & Supports
1 - Thin Steel Front Bumper Straightened and Chromed
1 - Aluminum Max Wedge Hood Scoop
1 - Aluminum Race HEMI Hood Scoop
1 - Very Rare 1964 Dodge Aluminum Stone Guard
I do not have the Aluminum Doors found with the 330 HEMI cars.
The price will depend on what configuration you wish to purchase, and the condition of the parts. I will offer the buyer the option of purchasing all the 1964 Dodge Aluminum I have.
The buyer will need to pick the 1964 Dodge Aluminum up, as I will not ship the Aluminum.
I will offer the complete package of 1964 Dodge 330 or 440 Aluminum for $30,000 obo. Note: The HEMI configuration will be more expensive.
It should be clear some of the Aluminum will require repair and straightening. For those who have worked to assemble a complete Aluminum Front End, they know this is an expensive and time consuming process. There are those who do fabricate 1964 Dodge and Plymouth Aluminum Front Ends. However, there will be substantial time and money associated with going that route.
If you have questions and want pictures, you may contact me via email at [email protected]
Thanks
Peter"
zkx14
Duster De-ruster
Hmm, yeah...no. gonna have to pass
zkx14
Duster De-ruster
Sounds like an awful lot of coin to save a little weight. Gotta wonder how much lighter that would be? Is this stuff that came from factory - making it rare?
dukeboy440
Well-Known Member
its the rarity of it thats driving the costs up. I've seen the complete setups for 10K before on ebay but never near 30K. No one reproduces them.
dukeboy440
Well-Known Member
If I had an original max wedge car that had wrecked and needed those, maybe maybe I get the insurance company to pay for it but otherwise, aint no way
dukeboy440
Well-Known Member
Mike's being quiet.....
zkx14
Duster De-ruster
Here's one. 1963 Dodge 330 Max Wedge Lightweight | Arizona 2017 | RM Sotheby's
Looks like they bring big bucks. But gotta believe its like a numbers match thing. The car is what it is, and it ain't what it ain't. If you slap all that on a car that did not come with it original all you did was decrease the value of the front end parts you bought.
zkx14
Duster De-ruster
I think he was going to miss all that crap he tossed. Went out and fell asleep in the dumpster.
dukeboy440
Well-Known Member
for sure.
dukeboy440
Well-Known Member
my wife's wanting me to start throwing some stuff away too.... again. Im not a hoarder by any means but some of the stuff like rarely used tools and such im not pitching lolI think he was going to miss all that crap he tossed. Went out and fell asleep in the dumpster.
ScampMike
Despicable Damn Yankee
contractor was here - and the co. for the roll-off showed up
zkx14
Duster De-ruster
I did trash quite a bit cleaning garage not long ago. I have a LOT of stuff I would like to get rid of. My problem is most of it has enough value that I don't want to dump it. Just need to get at it and do some ebay, CL, Salvation Army etc. I would do a yard sale, but I know that would be almost all me. Just not into dragging it all out. If I go that route I will probably leave a lot out there with a 'free' sign afterward
Ok, I just spent almost 3 hours posting pictures from Belvidere Happening...
I need a break, I'll catch up later..
Belvidere Happening Pictures
I need a break, I'll catch up later..
Belvidere Happening Pictures
ScampMike
Despicable Damn Yankee
yea - screw that yard sale noise - nothing about doing it is attractive at all.. usually 3 days worth of going through stuff and setting up, lucky to see 1/2 of what you put out go, and then you have to decide if you're hauling it back in, tossing it (which spends 1/2 of what you made at the sale) or leaving it out with a free sign..
ScampMike
Despicable Damn Yankee
yea - I tried to keep up with you - - at first...
I was just clicking and going...
I wanted to do it in middle of the night when nobody was around to post while I was to keep the flow going, but I slept too long and didn't get up until 5...
But I got them all done now... Go browse through them...
I took over 2500 pictures... I usually take two of each angle in case one is blurry...
ScampMike
Despicable Damn Yankee
well, gonna go kick around in the garage..
dukeboy440
Well-Known Member
my wife spent 2 weeks last spring doing a community wide, giant garage sale for kids stuff. made some 700 bucks and sold 90 percent of everything. rest is going in the next sale in september lol. But yeah, drove me nuts.
a lot of the stuff I have is mementos stuff ,trophies, plaques, banners etc from various awards i won. Dont really want to throw those out and they aint worth any dough. Really, I dont have a lot of stuff i want to keep. I do have some old army uniforms and such i thought about throwing on ebay and seeing what happens. army surplus stores around here dont give ya but about .50 cents a set.
dukeboy440
Well-Known Member
not working today?
zkx14
Duster De-ruster
Just did page one so far...
I forgot they used Charger badge on those mid 70s 'Cordobas'. Kinda like the Volare Dusters...
johnnycuda
JohnnyCuda's 68
Happy Monday!
Ben Drinkin
Hey bartender!
I completely disagree!!! But good morning to you...
zkx14
Duster De-ruster
dukeboy440
Well-Known Member
question, there doesnt appear to very many 64 polara 4 doors out there these days.most seem to end up as parts cars. Wondering if it'd be worth trying to keep it original with correct dated stuff or not?
-
