You know what's wierd, I never once had that in my 99. 378,000 miles I put on that truck. Though I was religious with replacing ball joints and tie rodsDeath wobble in the front end at highway speeds was a problem...
You know what's wierd, I never once had that in my 99. 378,000 miles I put on that truck. Though I was religious with replacing ball joints and tie rodsDeath wobble in the front end at highway speeds was a problem...
extra garage and beer time!!That it is! On a positive note, I have an air spray later this morning and if all goes well there I should be off by noon!
If the weather holds out I may get some extra garage time!
I usually take everything apart that I know how to get apart. Like the Bendix unit on that starter a while back.Don't know if that uses the same inner parts as the one in a combo valve. There were a lot of problems with the aftermarket ones a couple years ago (including Inline Tube) Don't know if that has been resolved. I rebuilt my combo combining used parts from 2 valves. If you get a used one, I would advise opening and clean/inspect. They build up sludge. Just use a lot of care to get it all back together as it was. And there is a spring in there...
And who might that be?The Ram Man may have one if nobody here does...
There are pics ...Oh good grief. It's now being reported that President Trunp may have fried his retinas by staring at the sun without glasses or protection....... unconfirmed source TMZ at this time
For a photoshop expert, I think using that old trick is kinda neat.
Pink pants? Make sure there are no leaks!Morning, Ray!
I'm going running with 'my' students in fifteen minutes. Will be fun!
Either have to suck it up or move on.not so good ...not really what I expected and I am finding out why it has a turn over
MITCHYKONG!Hey Rani !! Ray !!!