Co-worker and his wife went to one, kinda weird for me
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Wheel bearing is out. Taking a break. Why, you may ask?
Forgot to take my morning meds. Not going back to the house. A little test to see if they really make much difference now.
Got car hauler hooked up, so i can go grab the frame,im committed now. Will get done what i wanted to do yesterday.
Forgot to take my morning meds. Not going back to the house. A little test to see if they really make much difference now.
Got car hauler hooked up, so i can go grab the frame,im committed now. Will get done what i wanted to do yesterday.
zkx14
Duster De-ruster
Chiro did come to mind. They x-rayed upper spine and shoulder and said all in place. Pretty sure the transfer thing is what's happening cause I didn't smash my entire side in a 3 foot long vice. Which is what it feels like at times....
Yes. X Ray doesn't give a good look at soft tissue and cartilage... It's just easy to charge your insurance.
Hmmm. Not quite that cold
..
I made one. To plug my generator into a plug with power off to make my solar panels think power is on...
zkx14
Duster De-ruster
Well, just don't touch the shiny parts...
Last edited:
Unconventional
Well-Known Member
Ur freezer should be gettin' close to full
Unconventional
Well-Known Member
When I looked at NWS this mornin' O'side Airport had got down to 34°
They didn't do Oregon any favors in the 2nd round. SMU vs Penn State to Boise St seems like an easy ride for Penn St to the 3rd round
Frodee
Off center a bit
Frodee is here so nerd alert is on. I'm still alive and kicking.
Warm here and T shirt weather.
Warm here and T shirt weather.
Hey there Fred!
Frodee
Off center a bit
Hey Chris I see you have a warm day there so a good time to sit on the deck and smoke a cigar and have a drink.
You Sir, are a mind reader
Frodee
Off center a bit
Just what I'm heading outside to do. Cheers buddy.
Bearing done,tie rod end done, power wagon frame is home but still on trailer. Loaded with no ramps. Tipped a rim behind each wheel and as rim flipped it lifted enough to drag onto trailer. No ramps needed.
Now buddy Ron wants to bring the camper to put away in hay shed. **** could have brought it a month ago. Waits until there is a snowstorm brewing.
Now buddy Ron wants to bring the camper to put away in hay shed. **** could have brought it a month ago. Waits until there is a snowstorm brewing.
Ok. I've been putting VentShades on all my vehicles for years. I like being able to have them open a touch when I drive in the rain and when it's hot out and it's parked.
Got a set for the dually... Dangnanbbit these are drill and screw in. What a PITA. I did the front windows, I'm thinking through how to do the back. With as far as automotive adhesives have come, I feel like a dummy for not just glueing them in place. Most likely do the back ones that way
Got a set for the dually... Dangnanbbit these are drill and screw in. What a PITA. I did the front windows, I'm thinking through how to do the back. With as far as automotive adhesives have come, I feel like a dummy for not just glueing them in place. Most likely do the back ones that way
Looks like that guy got his payday... But was probably biting his nails.
Eagles 22
Panthers 16
So much for the spread
Following Fred's direction
dukeboy440
Well-Known Member
Finally freed the heavy sob. Used to be able to swamp these things in 4 hours, now it’s going in 4 days… I’m getting old
-
