Stop in for a cup of coffee

-
My beaker can beat up your beaker!

pop130.jpg
 
Mine don't have a beak, or a big block Ray, I did remove the flat center nose to perform some surgery, how is your 440 doing these days ?

View attachment 1716379893
Need it in the shop to pull the motor for head change and converter also. Want to re paint the fire wall when it is out and drill 2 holes on the pass side through the fender well so I can get to the plugs easier. Just no time for me to do it figure a week.
 
Need it in the shop to pull the motor for head change and converter also. Want to re paint the fire wall when it is out and drill 2 holes on the pass side through the fender well so I can get to the plugs easier. Just no time for me to do it figure a week.
I knew this but had to ask, I have been wondering what 440 you have it, and always wondered just how tight of a fit it was on exhaust system, always a cool ride
 
Which brings up the point where my Vet is telling me to be cautious of raw food diets for dogs because of the chance of contamination.

The dog has feasted on week-old deer carcasses and horse manure.. Really?
My dogs love horse poop, first thing they do when we feed them is find the fresh one.
 

Sadly my day looks exactly like yesterday. PT, limited movement and an ice pack. Lots of reading tho.i have a college on line class I could work on but it is sports psychology and I fear my brain is a bit to scrambled from pain pills to try that!
Take it easy this time. Class could be entertaining on pain pills.
 
I knew this but had to ask, I have been wondering what 440 you have it, and always wondered just how tight of a fit it was on exhaust system, always a cool ride
Motor is a boat motor from a Donte. Made it CW rotation prob 500 plus HP. Fit sucked tons of mods to make it work. Worst was finding a semi flush heater fan motor.
DSC00723.JPG
 
Still have to figure out where I will mount the NOX bottle. Trunk is busy with a vac pump and battery box. Thinking floor of the back seat.
 
Motor is a boat motor from a Donte. Made it CW rotation prob 500 plus HP. Fit sucked tons of mods to make it work. Worst was finding a semi flush heater fan motor.
Does it have a stainless crank ? I recall a friend putting a starter on a 350 Chebby he had in his stash and he was worried why it wouldn't start :lol: His brother and I was sipping on suds and walked over as he was trying to start it and we said that starter ain't going to work!! His brother said there is nothing wrong with the starter, the i got in his 64 Chebby and hitvthe key and gave him a couple minutes, he shook his head and said this thing is out of time!! Nope silly his brother said , look at the fan blades :rofl: never will forget the evening
 
@shittyslant6 this is a good idea, but would take it further. I wish I would have cut the entire roof off my Chager to do the cage. Another way is to hole saw the floor. Then it can be tacked, dropped theu the floor to weld on top, then put back up in. This worked for some but things I added later bit me. If ever again, I'd tack it in place, cut the roof off, weld fully, then put roof back on. Way less work.

View attachment 1716379783

View attachment 1716379784
I just got done reading the whole buildup of your charger and holy ****.
I do like the holes in the floor idea since my roof is IMMACULATE and I was really dreading putting holes in it.
 
Still have to figure out where I will mount the NOX bottle. Trunk is busy with a vac pump and battery box. Thinking floor of the back seat.
Raising your back seat about 4 inches (custom) and it should fit under it.
 
-
Back
Top Bottom