Stroker specific cams?

[Matts440]

Message @dart19666 Shane can make one for you at Crower.

 

[DrEamer]

So I just got done reading 8 pages of this thread wondering what was going to be the final outcome and here I am at a dead end that is 7 months old.
@DrEamer , My build is almost identical to yours, and it sounds like my goals are very similar (like what @nm9stheham described). I filled a request to Hughes, got a short answer, and to Lunati, but so far crickets. Have you made a final choice? Running anything yet?

I had Mike a B3 Racing design a cam for me. I started another thread which I will link here for you to read. I have not had a chance to do anything other then put it in the engine at this point.

Stroker specific cams (Part 2) cam reveal

Message @dart19666 Shane can make one for you at Crower.

I messaged Shane a couple times, he made one suggestion, told me to look up some other guy who ran that cam, and never heard from him again. Not at all impressed.

 

[dart19666]

I had Mike a B3 Racing design a cam for me. I started another thread which I will link here for you to read. I have not had a chance to do anything other then put it in the engine at this point.

Stroker specific cams (Part 2) cam reveal



I messaged Shane a couple times, he made one suggestion, told me to look up some other guy who ran that cam, and never heard from him again. Not at all impressed.

Well I could post the conversation that we had here. And for a Dr....I am not impressed either.

 

[dart19666]

Shane, thanks for reaching out. What I am looking for is a hydraulic roller cam for my 408 Magnum based stroker. I looked on your website, but could not really find what I was looking for. I think want something similar to the level 3 Chevy cams that you offer. I want to use the OE style lifters and distributor gear. Engine will be running Trick Flow 190 heads, TTI headers, and Edelbrock Pro-Flo4 injection. Car will have power brakes, and A/C. Transmission is a A518 overdrive with lock up, with 3.73 gears. Torque converter will be sent in to be re-stalled to match the cam. If you need any more information, please let me know.

Thanks,
Jeff
----------------------------------------------------------------
Ok cool I have some cam cards with videos "If I can find them" of what I have built for fellow A-body guys. When I find them I will IM you.

I am getting ready for the ZipTie drags in Tuscon this weekend and have taken Friday and Monday off. So it might be next week if that is ok for the video.
-----------------------------------------------------------
Ok this link is for one of FABO member and the name of the cam is a joke ha ha ha. But this cam works bitchen and we had almost the same set up. If I can find the video to show the exact numbers it made to the wheels I will post it, was super impressive.

Camshafts | Connecting Rods | Roller Lifters | Rockers | Crankshafts | Pushrods | Clutches
-----------------------------------------------------------------------
Tried to post a video
----------------------------

I'm not able to see the Facebook post for some reason. Do you know what day it was posted, maybe I can see it on your page.
-----------------------------------------

It was Carl Manoogian on FB. PM him and ask for the video. It was from his page.

----------------------------

Carl would not answer me on Facebook, so back to the drawing board.
---------------------------------------------------------

 

[DrEamer]

Shane, thanks for reaching out. What I am looking for is a hydraulic roller cam for my 408 Magnum based stroker. I looked on your website, but could not really find what I was looking for. I think want something similar to the level 3 Chevy cams that you offer. I want to use the OE style lifters and distributor gear. Engine will be running Trick Flow 190 heads, TTI headers, and Edelbrock Pro-Flo4 injection. Car will have power brakes, and A/C. Transmission is a A518 overdrive with lock up, with 3.73 gears. Torque converter will be sent in to be re-stalled to match the cam. If you need any more information, please let me know.

Thanks,
Jeff
----------------------------------------------------------------
Ok cool I have some cam cards with videos "If I can find them" of what I have built for fellow A-body guys. When I find them I will IM you.

I am getting ready for the ZipTie drags in Tuscon this weekend and have taken Friday and Monday off. So it might be next week if that is ok for the video.
-----------------------------------------------------------
Ok this link is for one of FABO member and the name of the cam is a joke ha ha ha. But this cam works bitchen and we had almost the same set up. If I can find the video to show the exact numbers it made to the wheels I will post it, was super impressive.

Camshafts | Connecting Rods | Roller Lifters | Rockers | Crankshafts | Pushrods | Clutches
-----------------------------------------------------------------------
Tried to post a video
----------------------------

I'm not able to see the Facebook post for some reason. Do you know what day it was posted, maybe I can see it on your page.
-----------------------------------------

It was Carl Manoogian on FB. PM him and ask for the video. It was from his page.

----------------------------

Carl would not answer me on Facebook, so back to the drawing board.
---------------------------------------------------------

I deleted the conversation, but glad you kept it. So I was the last response saying I could not find the the video, or contact the member you mentioned. You never got back to me, so where am I not telling the truth?All I said you did not get back to me which your post shows. As for me being a Doctor, read my signature, it's a play on words/spelling about DREAMING about E bodies. We can sit here and get into a pissing match if you like, but personally I have better things to, and I am sure you do too. I am sure you have a wealth of knowledge, and I would have liked to benefit from it. When you did not answer me, I thought you did not want my business. If what I said, offended you, I apologize.