JoesEdge
Well-Known Member
Ditto, but I opted for 1.5" × 3". Went in easy without cutting floor. I snugged it up tight to the floor.
Pat
Do you remember what wall thickness was the tubing that you used? Thanks!!
Ditto, but I opted for 1.5" × 3". Went in easy without cutting floor. I snugged it up tight to the floor.
Pat
Do you remember what wall thickness was the tubing that you used? Thanks!!
Hey Joe, in your thread you linked to above, what's the purpose of this hole?
View attachment 1715273207
View attachment 1715273208
I didn't see it mentioned in the bigblockdart article. And thanks everyone for sharing how you've done this. I'm pretty new to the fabrication end of things, so these threads are a big help.
.this is how i did mine... frame is tied. better late then never i guess..lmao
basically followed this.. Weld In Your Own Frame Connectors
Hey Joe, in your thread you linked to above, what's the purpose of this hole?
View attachment 1715273207
View attachment 1715273208
I didn't see it mentioned in the bigblockdart article. And thanks everyone for sharing how you've done this. I'm pretty new to the fabrication end of things, so these threads are a big help.