SUPER 6 CHOKE

-
A

A/MP

Well-Known Member
Joined
Nov 26, 2005
Messages
626
Reaction score
84
I'm about to switch out a 1v to 2v. The carb that I'll be using is from a 318. Looks the Super6 has a different choke assembly from the 318. Anybody fill me in? Thanks
 
Forget the crummy, nonadjustable, cold-blooded factory choke setup. Get a № 1232 electric choke kit. The choke lever on the 318 carb is different to the one on a 225 carb, so you will have to make a new choke pushrod and/or make a lever adapter as shown here (spaced outward from the carb toward the valve cover as needed), unless your 318 carb is a late-enough model to have the choke lever attached with a screw into the end of the choke shaft rather than swaged on and you can find a 6-cylinder choke lever to swap on. In that case, you can just use the 1232 choke kit as delivered.
 
slantsixdan said:
Forget the crummy, nonadjustable, cold-blooded factory choke setup. Get a № 1232 electric choke kit. The choke lever on the 318 carb is different to the one on a 225 carb, so you will have to make a new choke pushrod and/or make a lever adapter as shown here (spaced outward from the carb toward the valve cover as needed), unless your 318 carb is a late-enough model to have the choke lever attached with a screw into the end of the choke shaft rather than swaged on and you can find a 6-cylinder choke lever to swap on. In that case, you can just use the 1232 choke kit as delivered.
Click to expand...
 
You must log in or register to reply here.
-

Back
Top