tech question shift forks

-

V8-valiant

FABO Gold Member
FABO Gold Member
Joined
Apr 15, 2007
Messages
830
Reaction score
427
Location
Central Oregon
ok so i had my 833 out anyway and wanted to seal it up, i took the side cover off and the shift forks came out somewhere along the line but i dont know which one goes where? and awnsers? thanks to everyone.

008.JPG


007.JPG
 
The one on the left is your 3/4 piece. The other is for your 1/2 but should go in with the "stud" at the bottom. Know what I mean?
 
hi, after installing the side cover, shift the trans into rev, then tighten cover bolts, this will ensure that reverse will operate. test all gears on bench first.
 
-
Back
Top