The correct disc brake caliper and hose part #s?

[briwill70]

I recently purchased a 65 Dart that the previous owner started modifying but left unfinished. It has 74 Charger spindles and new calipers and hoses. I noticed that when I turn the wheel all the way left/right that the brake hose hits the control arm. I suspect that he didn't use the correct parts. Any advice how to confirm the correct parts for this conversion?

 

[72bluNblu]

Are the calipers to the front or the rear?

Here’s what DoctorDiff recommends...

Caliper/hose fitment:

Rear mount ('72 and older A bodies, '69 and older B-bodies):
Use '80 and newer slider calipers and '69 Camaro disc brake hoses

Front mount ('73 and newer A bodies, '70-'72 B-bodies and all E-bodies):
Use '79 and older slider calipers and '73 Mopar A-body disc brake hoses

 

[hemi71x]

The calipers mounted towards the front, or the rear?
Makes a difference for hoses, used, needed.

(0ops, somebody faster than me, on the keyboard.)

 

[briwill70]

The calipers mounted towards the front, or the rear?
Makes a difference for hoses, used, needed.

(0ops, somebody faster than me, on the keyboard.)

Calipers are on the front side.