I've accumulated too much slant stuff over the years and it's time to let most of it go since I've decided to go V8 in both my wagon and my 47 Dodge! I am keeping one motor that's currently under construction for a possible future project or maybe for my 87 truck (original slant truck). I do not need to sell this stuff; so it's not a "fire" sale.
IMPORTANT!!!: If you have a technical question, want additional or close-up pics, want more info, etc., post it in this thread. I do not consider these types questions as calling dibs or being 1,2, 3, in line or what it might cost to ship. Send me a PM if you're calling Dibs, need shipping costs in conjunction with buying the part, or want my PayPal or home address info for a money order. I will take PayPal using either Friends and Family or you pay the 3% fee or will take a USPS money order - your choice. I will try to combine purchases in one box wherever possible. On some of the of stuff, I can work with you on discounting prices for multiple purchases.
*******************************
1. Triple Weber/header set-up now back on the market for $1800. Contact me directly for more description and pics as when I edited the ad, I lost everything in the ad.
2. HYPERPAK SOLD
3. SUPER SIX IS SOLD
4. Head is SOLD!
5. Cam is SOLD!
6. CRANK SCRAPER is SOLD!
7. WINDAGE TRAYS SOLD!
8. MOPAR NOS OIL PUMP SOLD
9. CLEVITE OUL PUMP SOLD
10. And still another oil pump - here's an Australian factory slant oil pump with a remote filter assembly. This one was the standard and only oil pump used on the slants in Australia and probably other countries that used right hand drive. The oil pump was installed normally, then the lines were routed to wherever the remote filter mount was installed (ususally on the left hand side of the engine). The oil pressure sending unit was installed on the remote filter mount. All fittings are included just as as I received the unit. If I was installing a slant in my 47, I would be keeping this unit. I want $280 plus shipping for this set-up as that's what I paid when I bought it from slantsixdan. I can work with the buyer on a payment plan if needed.
View attachment 1715136764
View attachment 1715136765
View attachment 1715136766
View attachment 1715136768
View attachment 1715136769
View attachment 1715136767
11. DISTRIBUTOR SOLD
12. BOTH DOUBLE ROLLER TIMING SETS SOLD.
13. ONE SET SOLD! If you'd rather have a stock style steel timing chain and steel gears offered by Mopar Performance/Direct Connection in the late 80's, I've got 1 set left - $25 per set.
View attachment 1715136910 View attachment 1715136911
14. TRANSMISSION ADAPTER SOLD
15. OIL PAN IS SOLD.
16. From the motor I have partially disassembled (the 1990 assembled motor) here is the timing chain cover. I know that it's not the early A style with the separate timing chain tab as the tab is spot welded to the cover. It's got a brand new crank seal still installed - $25 plus shipping.
View attachment 1715136830
View attachment 1715136831
View attachment 1715136833
17. STEEL HEAD GASKET SOLD
18. Next up is a slant 833OD bellhousing. It's in good condition and includes the throw out bearing pivot arm. $125 plus shipping or local pickup.
View attachment 1715136817
View attachment 1715136820
View attachment 1715136821
View attachment 1715136823
19. MOTOR MOUNTS ARE SOLD!
20. VALVE COVER SOLD
21. 4 SPEED SETUP SOLD
22. I have been asked by several members if I were selling any Offy or Clifford valve covers. I have an Offy that I had the Offy name milled off for a special nameplate another member made for me. Then I took the valve cover to a local company to have a 2nd stovepipe and baffles TIG welded in. I ended up making 3 trips to the shop to inspect it and finally pulled it after the mess they made welding in the 2nd stovepipe. I was quite unhappy with it (to say the least), so I said screw it and I’ll deal with it later - that was over a year ago! I sent pics of the botched work to Leanna who told me no problem fixing it if I decided to take that course of action. Since I was going to have a slant sale, I decided to offer it in this sale thread - with a rock bottom price of $150 plus shipping. If this valve cover should sell, I will withdraw the valve cover in the next and last item from sale.
View attachment 1715136878
View attachment 1715136880
View attachment 1715136881
View attachment 1715136839
View attachment 1715136840
23. And finally bringing up the finish of my slant sale is my 2nd most prized slant possession behind the triple Weber setup - my Offy valve cover. I debated long and hard on whether to offer it or not since I was listing the Offy valve cover in #22. This one has been nicely modified with a 2nd stovepipe for a PCV cap plus baffles under both stovepipes. Baffles were never offered originally and still not offered on the newest castings. Leanna then worked her magic with an overall powder coat in silver with Flag Red between the fins. $450 firm plus shipping which is far less than what the cost was for the valve cover and her gorgeous work.
View attachment 1715136852
View attachment 1715136853
View attachment 1715136854
View attachment 1715136856
View attachment 1715136879
View attachment 1715136641
View attachment 1715136685
View attachment 1715136818
View attachment 1715136841
View attachment 1715136842
View attachment 1715136716
View attachment 1715136717
View attachment 1715136718
View attachment 1715136724
View attachment 1715136725
View attachment 1715136726
View attachment 1715136728
View attachment 1715136729
View attachment 1715136730
View attachment 1715136732
View attachment 1715136734
View attachment 1715136736
View attachment 1715136737
View attachment 1715136740
View attachment 1715136741
View attachment 1715136742
View attachment 1715136745
View attachment 1715136756
View attachment 1715136757
View attachment 1715136758
View attachment 1715136782
View attachment 1715136784
IMPORTANT!!!: If you have a technical question, want additional or close-up pics, want more info, etc., post it in this thread. I do not consider these types questions as calling dibs or being 1,2, 3, in line or what it might cost to ship. Send me a PM if you're calling Dibs, need shipping costs in conjunction with buying the part, or want my PayPal or home address info for a money order. I will take PayPal using either Friends and Family or you pay the 3% fee or will take a USPS money order - your choice. I will try to combine purchases in one box wherever possible. On some of the of stuff, I can work with you on discounting prices for multiple purchases.
*******************************
1. Triple Weber/header set-up now back on the market for $1800. Contact me directly for more description and pics as when I edited the ad, I lost everything in the ad.
2. HYPERPAK SOLD
3. SUPER SIX IS SOLD
4. Head is SOLD!
5. Cam is SOLD!
6. CRANK SCRAPER is SOLD!
7. WINDAGE TRAYS SOLD!
8. MOPAR NOS OIL PUMP SOLD
9. CLEVITE OUL PUMP SOLD
10. And still another oil pump - here's an Australian factory slant oil pump with a remote filter assembly. This one was the standard and only oil pump used on the slants in Australia and probably other countries that used right hand drive. The oil pump was installed normally, then the lines were routed to wherever the remote filter mount was installed (ususally on the left hand side of the engine). The oil pressure sending unit was installed on the remote filter mount. All fittings are included just as as I received the unit. If I was installing a slant in my 47, I would be keeping this unit. I want $280 plus shipping for this set-up as that's what I paid when I bought it from slantsixdan. I can work with the buyer on a payment plan if needed.
View attachment 1715136764
View attachment 1715136765
View attachment 1715136766
View attachment 1715136768
View attachment 1715136769
View attachment 1715136767
11. DISTRIBUTOR SOLD
12. BOTH DOUBLE ROLLER TIMING SETS SOLD.
13. ONE SET SOLD! If you'd rather have a stock style steel timing chain and steel gears offered by Mopar Performance/Direct Connection in the late 80's, I've got 1 set left - $25 per set.
View attachment 1715136910 View attachment 1715136911
14. TRANSMISSION ADAPTER SOLD
15. OIL PAN IS SOLD.
16. From the motor I have partially disassembled (the 1990 assembled motor) here is the timing chain cover. I know that it's not the early A style with the separate timing chain tab as the tab is spot welded to the cover. It's got a brand new crank seal still installed - $25 plus shipping.
View attachment 1715136830
View attachment 1715136831
View attachment 1715136833
17. STEEL HEAD GASKET SOLD
18. Next up is a slant 833OD bellhousing. It's in good condition and includes the throw out bearing pivot arm. $125 plus shipping or local pickup.
View attachment 1715136817
View attachment 1715136820
View attachment 1715136821
View attachment 1715136823
19. MOTOR MOUNTS ARE SOLD!
20. VALVE COVER SOLD
21. 4 SPEED SETUP SOLD
22. I have been asked by several members if I were selling any Offy or Clifford valve covers. I have an Offy that I had the Offy name milled off for a special nameplate another member made for me. Then I took the valve cover to a local company to have a 2nd stovepipe and baffles TIG welded in. I ended up making 3 trips to the shop to inspect it and finally pulled it after the mess they made welding in the 2nd stovepipe. I was quite unhappy with it (to say the least), so I said screw it and I’ll deal with it later - that was over a year ago! I sent pics of the botched work to Leanna who told me no problem fixing it if I decided to take that course of action. Since I was going to have a slant sale, I decided to offer it in this sale thread - with a rock bottom price of $150 plus shipping. If this valve cover should sell, I will withdraw the valve cover in the next and last item from sale.
View attachment 1715136878
View attachment 1715136880
View attachment 1715136881
View attachment 1715136839
View attachment 1715136840
23. And finally bringing up the finish of my slant sale is my 2nd most prized slant possession behind the triple Weber setup - my Offy valve cover. I debated long and hard on whether to offer it or not since I was listing the Offy valve cover in #22. This one has been nicely modified with a 2nd stovepipe for a PCV cap plus baffles under both stovepipes. Baffles were never offered originally and still not offered on the newest castings. Leanna then worked her magic with an overall powder coat in silver with Flag Red between the fins. $450 firm plus shipping which is far less than what the cost was for the valve cover and her gorgeous work.
View attachment 1715136852
View attachment 1715136853
View attachment 1715136854
View attachment 1715136856
View attachment 1715136879
View attachment 1715136641
View attachment 1715136685
View attachment 1715136818
View attachment 1715136841
View attachment 1715136842
View attachment 1715136716
View attachment 1715136717
View attachment 1715136718
View attachment 1715136724
View attachment 1715136725
View attachment 1715136726
View attachment 1715136728
View attachment 1715136729
View attachment 1715136730
View attachment 1715136732
View attachment 1715136734
View attachment 1715136736
View attachment 1715136737
View attachment 1715136740
View attachment 1715136741
View attachment 1715136742
View attachment 1715136745
View attachment 1715136756
View attachment 1715136757
View attachment 1715136758
View attachment 1715136782
View attachment 1715136784
Last edited:
