Scott Clark
Member
Hello all, I have a 1970 duster with a floor shift, I rebuilt the steering column and I can’t get it back in the right position, see pictures below. I can’t seem to see where the problem is, the column O ring retainer is right up against the firewall.
The Steering shaft isn’t going on all the way on the steering box, but I’m not 100% sure that it wasn’t like that before. What’s strange is that they are off in opposite directions.
Any help would be greatly appreciated.
Scott
The Steering shaft isn’t going on all the way on the steering box, but I’m not 100% sure that it wasn’t like that before. What’s strange is that they are off in opposite directions.
Any help would be greatly appreciated.
Scott