This is for strokerscamp

-

CUUDAK

Well-Known Member
Joined
Apr 13, 2008
Messages
2,002
Reaction score
94
Location
Hempstead, Tx
Pics of my 8.78 second 146mph 1/4 mile Ford Falcon. 1.32 60ft tripped with the Back tires!! The first 2 was before I repainted it after I smacked the wall in Baytown. The crank let go and BOOM!!! 4 months later it was Sonic Blue with a new 514 Kaase headed stroker. Several other photos in between. That is my Big head kneeling by the right fender lol!

Front and of course backhalved.
2640lbs before my fatazz sat in it!!
Ford Truck 460 bored .080 over
Eagle 4.14 stroker crank
Arais custom pistons(pin was into the last ring groove)
Oliver Billet steel 6.8" Chivy rods
Kaase gen1 heads 2.30int 1.92exh fully ported and polished
Davinci prepped 1250 Dominator
822 lift custom grind cam w/1.72 Dove roller rockers
Glide with Probrake and 5500 Coan stall
9" w/4.86 progear on 32" Hoosiers
 

Attachments

  • C3BIRD 001.jpg
    120.3 KB · Views: 182
  • C3BIRD 003.jpg
    127.9 KB · Views: 176
  • fierce falcon wheel stand.jpg
    124.3 KB · Views: 179
  • hmp 1 29 06 bad ***.jpg
    120.7 KB · Views: 175
  • new bird 002.jpg
    152.2 KB · Views: 175
  • new bird 004.jpg
    159.3 KB · Views: 172
  • 1083007441608.jpg
    38 KB · Views: 172
  • 514.jpg
    27.4 KB · Views: 177
  • dabird.jpg
    125.4 KB · Views: 179
very nice!! were building a 64 falcon post AFX style and a straight axle in the front! has all aluminum 427 small block ford with T56
 
O it has a passenger seat too!!! Scared the SH!!!!!!T out of my wife. I intended for her to drive it but once I took her for a pass that was TOTALLY out of the question!! She wanted nothing to do with it. LOL!!!
 
very nice!! were building a 64 falcon post AFX style and a straight axle in the front! has all aluminum 427 small block ford with T56

COOL!! I have a tricked C6 for an FE with trans-brake I am looking to trade for a prepped C4 for my wifes 66 Muttstang!!
 
My wife has a 1966 Muttstang.. In the process of rebuilding a 306 for it. It also had a 427 FE in it with a 250 shot of N2O! It was a 9.80 car. Cam went out the back of the block and took out the convertor. Dammit!! I will find some pics of it later to post too.
 
Man that thing is wicked. Ain't nuthin grandma about that Falcon. Thanks doood.
 
Nice car!
There used to be one around here years ago with "Just Falcon Around" painted on the side.
I always liked these cars.
 
nice looking falcon! read it all wrong first and thought you tripped the 1/4 cels with the backwheels that would have been quite a acomplishment without scarying yourself halfway to death, saw a streetnova do that a few years back running a 7.85sec at just under 300km/h lifting the frontwheels the last 100feet
 
nice looking falcon! read it all wrong first and thought you tripped the 1/4 cels with the backwheels that would have been quite a acomplishment without scarying yourself halfway to death, saw a streetnova do that a few years back running a 7.85sec at just under 300km/h lifting the frontwheels the last 100feet

Lol!!
I wouldn't have known what to do if that happened! Although that Bigblock did come on in the big end!! I shifted it at 7200 rpm.. That 514 spun high!!
 
thats not a nova? :) heheheh great looking falcon man. ovals and M's can get along just leave the bowties in the parts stores
 
-
Back
Top