Throttle cable problems

[Paul Davidson]

I have a 67 barracuda with a 408 and a edelbrock rpm airgap it's a 4 spd so all I need is a throttle cable my original is about an in.short is there somewhere that lists cable lenths?

 

[coloradohill]

Check Bouchillon.

Home - Bouchillon Performance Engineering

Products: Accelerator Cables - Bouchillon Performance Engineering

High quality and reasonable prices

 

[Oldmanmopar]

Get one off of a 318. They are longer then a 340. the next longest is a slant six. You may have the wrong bracket. The orange one pictured is for a 4bbl

 

[Newbomb Turk]

Just extend the bracket you have. I’ve been doing it since 1980

 

[Paul Davidson]

Just extend the bracket you have. I’ve been doing it since 1980

The cable is to short and because of its age it doesn’t want to bend

 

[lemondana]

Mancini sells longer cables and they also sell the AR Engineering tall throttle brackets.

 

[junkyardhero]

if you follow this link there's a chart in the description/photo that gives the various lengths of the different stock cables.

Mancini Racing Race Hemi Throttle Cable

you'll likely do good with a stock /6 cable

hth

 

[Paul Davidson]

if you follow this link there's a chart in the description/photo that gives the various lengths of the different stock cables.

http://[URL]https://www.manciniracing.com/mararahethca.html

[/URL]

you'll likely do good with a stock /6 cable

hth

Thank you that's what I'm lookin for

 

[AndyF]

I make adjustable throttle brackets for aftermarket intakes so you can tilt the cable at the correct angle.
Throttle Bracket Kits | AR Engineering

 

[Paul Davidson]

I make adjustable throttle brackets for aftermarket intakes so you can tilt the cable at the correct angle.
Throttle Bracket Kits | AR Engineering

I have one of your sniper mounts my problem is my cable is old and stiff and about an in. To short

 

[AndyF]

You should be in luck with a new cable from Mancini. You just have to make sure which firewall mount that you have (round or square) and then measure the length.