Throttle cable set up with Indy Intake?

-

Rodzilla

Well-Known Member
Joined
Jan 6, 2011
Messages
1,152
Reaction score
67
Location
Red Deer, Alberta
For you guys who are running Indy intake/heads could you throw up some pics of your brackets/ throttle cable setup you run. I am running a Mighty Demon 850 to start. I only ask cause I never got anything but a stock cable with my un-assembled car when I bought it, and the 360-3 intake looks too high to be running factory stuff anyway. I've been looking at a Lokar cable, comes with a bracket (I think is too low?), and I still need a return spring bracket. Suggestions, and photos?

http://www.summitracing.com/parts/LOK-DP-1000HT/
 
Indy also makes the bracket for their tall intakes. I think it was around 30-35 bucks.
 
Took 2 360's from trucks and made one. Total investment $10.00 . Cable replacement from is from any mopar. Durability . Its been on the car since 71. My buddies after market cable lasted less then a year.
 

Attachments

  • DSCF0041.jpg
    109.1 KB · Views: 366
I use the Lokar setup on my victor intake. It bolts to the carb stud so will work on most intakes. It came with return springs. Not a very good pic but you get the idea.
 

Attachments

  • PB300005.jpg
    113.4 KB · Views: 331
IMGP1125.jpg
 
No matter what holder you decide there is no cable stronger then the factory one there are three lengths 318 , 340 , /6 thats shortest to longest. Alot of the after market cables are made of real cheap material.
 
No matter what holder you decide there is no cable stronger then the factory one there are three lengths 318 , 340 , /6 thats shortest to longest. Alot of the after market cables are made of real cheap material.

I will keep that in mind, thanks.
 
Please also keep in mind that it is good insurance to have more than one throttle return spring. I was behind a car at the track last weekend when his throttle stuck open and he bounced off the wall at full throttle. I have 3 springs on mine. I have a modified kickdown bracket mounted (raised higher by adding sections) stock throttle cable. Works well. Also use the KD rods.
 
-
Back
Top