Tightening suspension bushings

[67dodgedartconv]

Are the lower control arm, upper control arm, and strut rod bushings the only ones torqued after suspension is loaded? Is it ok to tighten everything else before suspension is loaded (ball joints, idler and Pittman arms, tie rods)? Thanks.

 

[lilcuda]

Yes, you are correct.

 

[dano]

Depends. Rubber bushing yes, tighten at ride height. Delrin, Urethane, and spherical joints it your option but these are aftermarket components so either follow the MFG's instructions or use your judgement on how they work with the suspension, are lubricated, etc.

 

[67dodgedartconv]

Thanks, guys.