AdamR
Big Member
Can someone recommend a good trans blanket for a 904. May aswell put one in when I change transmissions.
Trans blanket?
- Thread starter AdamR
- Start date
-
onehellofadart
Well-Known Member
Just remember to slide it on from the rear of the trans.
Right Mikel :-\"
:mrgreen:
Right Mikel :-\"
:mrgreen:
AdamR
Big Member
LOL, or put it on top of the trans before bolting it up.
Johnny P
Active Member
Adam the trans blanket is OK. If your trans doesnt leak any fluid . It can be a little problem. I would look at CSI shield for 904 .I got one cover whole trans up easy to get pan off for band adjustments. Part # is 838 I think Around 280 from Barnetts performance.
moparracer
Well-Known Member
I switched from a blanket to a CSI composite shield and couldn't be happier with the choice. The trans runs cooler because it doesn't wrap all the way around, fits tight floorboards,changing fluid and filter is much easier, and gives an overall much neater appearance under the car. They also are a flexplate shield which a blanket is not. They are a little more expensive but imo worth every penny.
Johnny P
Active Member
Yes everthing you said is right on the money? It is a great product.
AdamR
Big Member
I'll look in to shields too.
Mikel you have a 727 right ? I should have alittle more room then you with my lil ol' 904.
Mikel you have a 727 right ? I should have alittle more room then you with my lil ol' 904.
moparracer
Well-Known Member
One thing I forgot to mention about the CSI shield is the tabs on the bellhousing area must be trimmed off the transmission to use the shield. This may or may not be a problem for you but you may not be able to use a factory column shifter. I have a modified case if you need pictures to see what i'm referring to.
AdamR
Big Member
Thanks I know what your talking about. I have a T/A shifter.
-
