Transgo tf-3?

[dartswinger84]

Does that kit use a reverse pattern.... P R N 123 ??? or forward. I know that, it use stock valve body,but i'm not sure about that pattern.

 

[doug 371]

stock, forward pattern

 

[dartswinger84]

how about kick-down linkage, or cables, should i use that with tf-3.

 

[pettybludart]

No kickdown needed as it,s a manual valvebody(always shifting up/down)
I pulled the kickdown lever back to 3/4 and tied it off for max pressure.

 

[kursplat]

how about kick-down linkage, or cables, should i use that with tf-3.

i was told years ago by my trans builder to run the kick down linkage OR wire the lever in the kick down position with my transgo manual VB or it would take alot of life out of the trans.
i ran that thing (727 w/a 340) everyday for 12 years on the street and never had a problem

 

[oldkimmer]

.........If its a street car, use the kick down, if strictly track, just tie the lever all the way back.........kim.......