[SOLD] TTI headers, A-Body, LA-series + W-2 heads, "Race" series 1-7/8"

[Swiftshifter]

TTI headers, Mopar A-Body (Duster, Demon, Dart, Valiant), W-2 head LA-series Small Block, 1-7/8" primary size, "Race Headers"

Page on the TTI website:

http://ttiexhaust.com/Category-ClassicHeaders/34017835/TTi34017835.htm

Passenger's Side is just about flawless, Driver's Side will need a couple of small tube sections repaired where some Wile E. Coyote "Super Genius" tried to fit 'em to a car with a weird steering box. I included a shot from the TTI site that shows how the tube is supposed to look (pretty straightforward, luckily)

These are $823 NEW + shipping, and ballpark safe estimates I got were $150-200 at a chassis shop (if you're a decent welder, repair 'em yourself and you'll be SET!), so save $350+ here, plus no waiting for a custom order (W-2 head flange isn't listed?) and paying for shipping $$$ (last set I saw ordered was $1011/shipped ...... in 2008) Remember, these are the larger, higher-HP primary tube size of 1 7/8". Run your 340-360 now, and not have to worry about upgrading headers when you build your big-inch 408-440.

TTI makes the BEST fitting headers for Mopars on the market, bar none. Hedman Husler and Hooker Super Comp series don't even come close.

$350 (shipping is probably ~$80-90)

Thank you!

---==Temio
Yuba City, CA 95991 (ad' is also on Craigslist-Sacramento)

 

[w2dart]

Will these fit w2. The tti add posted doesn't say for w2. (Just want to make sure). I have the 810 w2 heads. Will you take 250.00. Thanks​

 

[rumblefish360]

Hummm, your right, not designed for W2 heads. They will fit on. Maybe the old adapters are needed for the LA to W2 exhaust?

 

[604B1duster]

re read his ad, think he's saying they were custom ordered with w2 flanges. Look at his pics, wide bolt spacing.

 

[muleskinner]

TTI headers, Mopar A-Body (Duster, Demon, Dart, Valiant), W-2 head LA-series Small Block, 1-7/8" primary size, "Race Headers"

Page on the TTI website:

http://ttiexhaust.com/Category-ClassicHeaders/34017835/TTi34017835.htm

Passenger's Side is just about flawless, Driver's Side will need a couple of small tube sections repaired where some Wile E. Coyote "Super Genius" tried to fit 'em to a car with a weird steering box. I included a shot from the TTI site that shows how the tube is supposed to look (pretty straightforward, luckily)

These are $823 NEW + shipping, and ballpark safe estimates I got were $150-200 at a chassis shop (if you're a decent welder, repair 'em yourself and you'll be SET!), so save $350+ here, plus no waiting for a custom order (W-2 head flange isn't listed?) and paying for shipping $$$ (last set I saw ordered was $1011/shipped ...... in 2008) Remember, these are the larger, higher-HP primary tube size of 1 7/8". Run your 340-360 now, and not have to worry about upgrading headers when you build your big-inch 408-440.

TTI makes the BEST fitting headers for Mopars on the market, bar none. Hedman Husler and Hooker Super Comp series don't even come close.

$350 (shipping is probably ~$80-90)

Thank you!

---==Temio
Yuba City, CA 95991 (ad' is also on Craigslist-Sacramento)



View attachment 1714920208

View attachment 1714920209

View attachment 1714920210

View attachment 1714920211

 

[muleskinner]

If you will do $400 shipped to 15683 i can pay by paypal now

 

[Swiftshifter]

If you will do $400 shipped to 15683 i can pay by paypal now

SOLD! Thank you, muleskinner! These'll be headin' your direction this week!