Tuff Wheel

[monoptn]

I recently bought a grant repop Tuff wheel for my 72 Demon, along with the horn kit. It looks like I need a spacer of some type also to make up for the shallow dish on the tuff wheel. Do I need one, and if so, where do I get it?

Could someone please post a photo of a tuff wheel in an a body? From the side so I can see the spacing.

Thanks!

 

[redfastback]

did you buy the installation kit?

 

[monoptn]

Yes, I got the installation kit, and it fits fine. It's fine the way it is. Of course, the dish is not as deep, so the wheel itself is closer to the turn signal lever and trans shift lever than the original wheel was.

 

[7172 duster]

A body tuff wheel W spacer

[/IMG]

[/IMG]

 

[briankaplan]

I just put the Grant 870 on the Duster. Fit great with the
horn adaptor. The turn signal lever was a little close. I kept
hitting it when turning. I bent it towards the dash slightly.

 

[monoptn]

Thanks for the pictures guys. Mine does not have the spacer like 7172Duster posted. I think if I put one that thick on it, the wheel would be too close to the driver. I'll just leave it the way it is.

Monoptn

 

[jjr426]

i have the same wheel in my duster and i did the same thing briankaplan did i just pulled the turn signal lever off and bent it back towards the dash and it is fine now no more hitting it with my hand.