[FOR SALE] two A-833 transmissions

[randy schoenberger]

i beleave i have two bc body transmissions,1964-1969 4.35" imput bearing retainer and 23 spline, one looks to be in excellent condition the other has the imput bearing retainer loose, also i have a bell housing, pressure plate, fly wheel and clutch, my dad had these in his garage that i am cleaning out. I have seen many prices for these transmissions and i am open to offers, but like to sell as a lot for $1200.00.

 

[72bluNblu]

Since a mod hasn't already posted it, you must list a price even if you're considering offers.

And, neither of those transmissions are E-body transmissions. E-body transmissions have a tail housing with two shift mount locations, and they use the rear one, which neither of those housings has. Per Brewers- " Extension housing casting number C-96707 for 1966-68 B-body transmissions with 30 spline output/307 bearing."

Not positive what the other one is, looks B body and probably 64/65 because of the output flange/trunnion set up.

 

[yellow rose]

I'd be interested in the flanged box but I'm betting the shipping would kill both of us.

Anyone have an idea what shipping that gear box from kansas to Washington state?

 

[sireland67]

The last gearbox I shipped was from WV to CA and it was $190.00

 

[jack68gts]

Shipping my 4 spd from Pennsylvania to gyc in oregon was 185.00,,,but i bought the special made shipping box from Brewers,,with the heavy cardboard box and form fitted inserts,,,which keeps the weight just under the limit for FEDEX and UPS,,,if you use a plywood box or pallet,,it increases the weight over the limit FEDEX will take,,,and then you need a common carrier,, which would have been 300+ for me

 

[randy schoenberger]

Since a mod hasn't already posted it, you must list a price even if you're considering offers.

And, neither of those transmissions are E-body transmissions. E-body transmissions have a tail housing with two shift mount locations, and they use the rear one, which neither of those housings has. Per Brewers- " Extension housing casting number C-96707 for 1966-68 B-body transmissions with 30 spline output/307 bearing."

Not positive what the other one is, looks B body and probably 64/65 because of the output flange/trunnion set up.

didn't see anything where you have to list a price but like to sell all for $1200,00 and i did take off the e body thanks just trying to see what they are worth and sell them