Uni joint help!!!

[1967formulaS]

Hi guys,
I've got a 67 barracuda formula S, factory 383/4 speed 8 3/4 rear car.
I've put in a dana s60 and it has a U1600 yoke that accepts a 1350 uni.
I am using my original driveshaft out of the car that has the original size uni joint in it. Im not sure what the size is called, 7290 rings a Bell.

Is there an offset uni that will go from my original driveshaft to the 1350 yoke??

I really dont want to cut my one up.
A link or contact info would be great.

 

[cryplydog]

change yoke to a 7290. And also the yoke centerline on the sixty is 1-1/8 longer than the 8-3/4 so you will need to shorten the shaft at least that dim. Call strange or Dr.Diff to verify. Good luck