fishy68
Tyr Fryr's Inc.
For sale is a good used solid roller cam, brand new Comp springs, lifters, and a bronze gear drive for a small block. The cam started life as a Crane solid roller but was reground by Comp cams to their 1476 lobes which are what the 20-701-9 cam is. Here are the specs in short
Total duration is 288/288 degrees.
Duration at .050 is 243/243 degrees
Lift is .550/.550
110 lobe center
Here's a link to it on Summit's site that tells more about it
http://www.summitracing.com/parts/CCA-20-701-9/
The cam has a little scuffing on one lobe and I was unsure about it so I took it to my machinist who has been a Mopar racer for nearly 40 yrs. and he said it'd be fine. Just the lifters need replaced.
I also have a brand new set of 914-16 Comp springs that are spec'd for it.
Also have the bronze oil pump drive that's in excellent shape.
Also have a set of lifters but 6 need work or replaced. They are the solid body lifters so they'll drop right in your block without oiling mods (except possibly a little clearance grinding).
All the parts new total nearly $1000 and I'm only asking $275 OBO plus shipping for the whole shebang.
PM me if interested.
Total duration is 288/288 degrees.
Duration at .050 is 243/243 degrees
Lift is .550/.550
110 lobe center
Here's a link to it on Summit's site that tells more about it
http://www.summitracing.com/parts/CCA-20-701-9/
The cam has a little scuffing on one lobe and I was unsure about it so I took it to my machinist who has been a Mopar racer for nearly 40 yrs. and he said it'd be fine. Just the lifters need replaced.
I also have a brand new set of 914-16 Comp springs that are spec'd for it.
Also have the bronze oil pump drive that's in excellent shape.
Also have a set of lifters but 6 need work or replaced. They are the solid body lifters so they'll drop right in your block without oiling mods (except possibly a little clearance grinding).
All the parts new total nearly $1000 and I'm only asking $275 OBO plus shipping for the whole shebang.
PM me if interested.
