w2 heads intake and rocker gear

-
Status
Not open for further replies.
D

dartrunner

Active Member
Joined
Apr 12, 2011
Messages
42
Reaction score
3
Location
pennsylvania
Rating - 0%
0   0   0
Contact seller
Used old style w2 race heads. This set-up came off of a running 340 in a car I bought. The heads and intake look like they have some minor port match work done. I can't see any other port work done the runners still like stock rough cast. The rockers are ducktile iron on aluminum stands. the shafts look like the old Mullen and Co. with removable plugs in the ends for cleaning. They do have bannana grooves. The intake is an edelbrock victor w2. It looks like it was opened up a little at the top where the carb bolts on but not much and port matched. $1600+shipping for all or you can pick up locally near scranton pa. I have many more small block race parts for sale contact me.
 

Attachments

  • DSCN0511resize5.jpg
    95.6 KB · Views: 2,772
  • DSCN0517resize6.jpg
    78.4 KB · Views: 2,546
Brutus said:
Do you have the headers too?
Click to expand...

No Sorry I don't, The headers that were on these were stock small block headers. They didn't match up that well to the port on the w2. If you look closely at the exhaust port you can see the carbon mark that the stock header left on the head. It didn't run bad but I'm sure it wasn't the optimum setup. You can get headers from TTI and I think Heddman still makes a w2 header or you can find a used set somewhere. They pop up on e-bay sometimes. thanks, Frank.
 
You should give this stuff to me Frank. LOL!!
Frank is a good guy. He's a personal friend and his parts are all top notch. Buy his parts. You won't be sorry.
Frank H.
 
W2-1969Dart said:
would you sell the rockers and assembly separate ??
Click to expand...

I would like to sell this as a package deal. It is a good selling factor that the buyer doesn't have to buy anything else accept headers. Sorry, I wish I could help. I do have a set of new w2 crane 1.6 roller rockers but They come with econo non-offset shafts and no stands if that helps you. Thanks, Frank.
 
dartrunner said:
I would like to sell this as a package deal. It is a good selling factor that the buyer doesn't have to buy anything else accept headers. Sorry, I wish I could help. I do have a set of new w2 crane 1.6 roller rockers but They come with econo non-offset shafts and no stands if that helps you. Thanks, Frank.
Click to expand...
Are they still available?
 
grimreaper said:
What are the prices now that the rocker assemblies are gone?
Click to expand...

The open chamber w2 heads are used they are $800 plus shipping. The intakes are $150 each plus shipping one is a edelbrock victor w2 the other is a w2 Holley strip dominator. The arp w2 head studs are new $100 plus shipping. The new W2 closed chamber heads are $800 plus shipping
 
dartrunner said:
the open chamber w2 heads are used they are $800 plus shipping. The intakes are $150 each plus shipping one is a edelbrock victor w2 the other is a w2 holley strip dominator. The arp w2 head studs are new $100 plus shipping. The new w2 closed chamber heads are $800 plus shipping
Click to expand...
are open chamber heads still available? What condition are they in? Any porting done? Thanks
 
1975 PROSTREET DUSTER said:
are open chamber heads still available? What condition are they in? Any porting done? Thanks
Click to expand...
.
Yes the heads are still available they are used they do not have any port work done. They are early castings they have the stock LA header bolt pattern they have been crack tested. I have a w2 Holley strip dominator all other parts are sold pm me if you are interested thanks dartrunner
 
Hi Frank,
What other Heads / Rockers or any Forged .030 over Pistons For Sale? 340 Parts is My Interest & I would be interested to here what Items U have available.
Thanks Modog1967
 
modog1967 said:
hi frank,
what other heads / rockers or any forged .030 over pistons for sale? 340 parts is my interest & i would be interested to here what items u have available.
Thanks modog1967
Click to expand...
i only have the used w2 open chamber heads and the w2 holley strip dominator intake. The rockers and edelbrock intake have been sold. I have a complete 340 that is fresh with dyno time(426 torque 482 hp) and about 300 miles on it. I have a cast iron 90 degree oil filter adapter. If you need prices or more info pm me. Thanks, frank.
 
Hey Frank, im finally setting up the mopar roller rockers I bought from you. You dont happen to have any offset shafts do you?
 
Status
Not open for further replies.
-

Back
Top