Moparsc
Member
If this is the wrong spot to put this, I apologize and please delete.
W8 Arrington heads​
​New PSI Valve Springs
​Titaniumn Intake
​Ferra Super Alloy Exhaust
​43 cc chambers
​Freshened by Shady Dell
​
Jesel Rocker arms​
Spray Valve Covers​
W8 intake modified for EFI with fuel rails​
​
9.00" deck R3 block modified for wet sump 4.185 Bore​
​CP dish Pistons
​GRP 5.7" Pro Mod rods
​LA 3.33" crank Chevy flange
​Approx 50-60 passes 1/8 mile
The 3.33 crank and 5.7 rods and CP pistons was in my car and went 5.01 at 149 mph at almost 3400 lbs. had plenty left in it but decided to go bigger over winter.
The only reason I pulled it out us u was going with bigger turbos so
​
9.00" deck R3 block modified for wet sump 4.185 Bore​
​Ready to assemble fresh machine work
​Bryant 3.7" crank 340 main 2.1 rod(Brand new…other than balancing)Chevy flange
​Diamond 22cc dished pistons
​MGP Promod Rod 5.83" long (Brand New)
​GRP 5.75" Promod rods 5 passes 1/8 mile
​
3.8" stroke forged crank 340 mains 10 under rods​Chrysler flange
Power glide flywheels one has adapter from mopar to Chevy
I have every thing to make either short block a complete motor...lifters, cam, pushrods , dist, waterpump, timing , oil pan etc...
Make offer located in South Carolina$7500 OBO for every thing
W8 Arrington heads​
​New PSI Valve Springs
​Titaniumn Intake
​Ferra Super Alloy Exhaust
​43 cc chambers
​Freshened by Shady Dell
​
Jesel Rocker arms​
Spray Valve Covers​
W8 intake modified for EFI with fuel rails​
​
9.00" deck R3 block modified for wet sump 4.185 Bore​
​CP dish Pistons
​GRP 5.7" Pro Mod rods
​LA 3.33" crank Chevy flange
​Approx 50-60 passes 1/8 mile
The 3.33 crank and 5.7 rods and CP pistons was in my car and went 5.01 at 149 mph at almost 3400 lbs. had plenty left in it but decided to go bigger over winter.
The only reason I pulled it out us u was going with bigger turbos so
​
9.00" deck R3 block modified for wet sump 4.185 Bore​
​Ready to assemble fresh machine work
​Bryant 3.7" crank 340 main 2.1 rod(Brand new…other than balancing)Chevy flange
​Diamond 22cc dished pistons
​MGP Promod Rod 5.83" long (Brand New)
​GRP 5.75" Promod rods 5 passes 1/8 mile
​
3.8" stroke forged crank 340 mains 10 under rods​Chrysler flange
Power glide flywheels one has adapter from mopar to Chevy
I have every thing to make either short block a complete motor...lifters, cam, pushrods , dist, waterpump, timing , oil pan etc...
Make offer located in South Carolina$7500 OBO for every thing
