[WANTED] Wanted 6-1/4" Midland Brake Booster 69 A-Body
- Thread starter dpalsmeier
- Start date
-
- Status
Commando66
She's a beaut Clark!
dpalsmeier
Active Member
Yes,
Spoke with Booster Steve. I need a good core for him to rebuild.
Spoke with Booster Steve. I need a good core for him to rebuild.
dpalsmeier
Active Member
Can you get a pic that shows diameter?
Perhaps lay a framing square along bolt pattern surface?
Thanks
Perhaps lay a framing square along bolt pattern surface?
Thanks
Here is what I have . The booster was restored my the Ram Man. It was for a 1968 GTS dart with front disks brakes. Original. 383 4- speed . I don’t think the diameter is 6 1/4 closer to 7”
MOPAR4Me
Well-Known Member
If you are looking for a factory Midland unit for 67-69, which matches your listing pics, it would be the Midland 7” 1967-1972 application unit.
The second pic you included in your wanted post reflects a 3.5” Radius measurement, which also matches the 7” diameter referenced. Midland does/did not make a 6 1/4” unit installed in 67-69 MOPARS. Booster Steve could confirm this.
I have nos kit
Kit
dpalsmeier
Active Member
The 6" suggestion came from my Friday phone call with Booster Steve.
Also, 6-1/4" Midland (small photo) appears on the website for Harmon Classic Brakes.
dpalsmeier
Active Member
Do you have an actual booster?
MOPAR4Me
Well-Known Member
Got you, sounds like you are going with a non-factory/MOPAR set-up, best of luck.
Here it is
dpalsmeier
Active Member
Can we get a diameter measurement?
That looks sweet, but I already know the stock 7" does not clear my 273 Charger valve covers.
dpalsmeier
Active Member
Restoration shop put on a GM KIT Booster & MC. I have factory correct discs and spindles for 65 Dart. Looking to clear the 273 Charger valve covers with something closer to factory.
thanks for the feedback.
dpalsmeier
Active Member
Davescuda,
Any more info on those sizes?
Any more info on those sizes?
- Status
-
