Wanted: 61 Fury
- Thread starter GTSDustin
- Start date
-
- Status
newmexguy
Well-Known Member
might want to try:
www.forcbodiesonly - pretty dead however
desert valley
memory lane
the c body guy in tiffin? ohio
I have a 66 two door post shell you can have for $450, although I don't think youd be intrested - clean body though
www.forcbodiesonly - pretty dead however
desert valley
memory lane
the c body guy in tiffin? ohio
I have a 66 two door post shell you can have for $450, although I don't think youd be intrested - clean body though
GTSDustin
Well-Known Member
I bet, those were cars! Lots of stlye went into the 50's and early 60's cars, especially mopars!
GTSDustin
Well-Known Member
Have any pics? Never seen one with small rear glass.
YY1
Well-Known Member
4 door, but '61-
http://lakeland.craigslist.org/cto/2908675162.html
Actually, there was that Savoy that same (I believe) body style at the Zepherhills swap/auction.
Factory long ram, 3 on the tree, radio/heater delete (something else delete, too)- once owned by Bobby Allison.
I think it was for sale.
http://wn.com/Plymouth_Savoy
That vid show $34K, but I think it was closer to 20K at ZH.
http://lakeland.craigslist.org/cto/2908675162.html
Actually, there was that Savoy that same (I believe) body style at the Zepherhills swap/auction.
Factory long ram, 3 on the tree, radio/heater delete (something else delete, too)- once owned by Bobby Allison.
I think it was for sale.
http://wn.com/Plymouth_Savoy
That vid show $34K, but I think it was closer to 20K at ZH.
Depending on your willingness to travel, there have been nice restorable examples on both the El Paso, TX (red/red)and Dallas/Ft Worth (blk/red) craigslist in the last month or two. Also there is a salvage yard on the Denver craigslist advertising parts/cars. Hope you find one to save, as these are very unique-but hard to find in restorable condition.
Lemmie see if I can talk Rodney into lettin me take some. So far he said he doesn't wanna sell it. He went all the way to Canada from Milledgeville, Georgia to get the thing. I'm sure I can get a few pics though.
Yeah he said I could get some pics. I will bring my camera tomorrow and upload some tomorrow evenin. It's a solid ****. I would imagine with a good offer, it would move.
70DartMike
Too many projects
There are a few up here in Canada for sale right now, in BC.
http://vancouver.en.craigslist.ca/rds/cto/2989542918.html - $1500
"1961 Plymouth Belvedere 2drht, no motor or trans [factory 6cyl push button auto], mostly complete minus motor and tranny, solid body, minimal rust in lower quarters and fenders, floors rusted out but trunk and frame are good, all glass is good,all trim is there...some in great shape some not, all interior part are there, seats need reapolstering but door panels are in good shape. I bought the car a few years back with the intent on hot rodding it but due to other projects I dont think Im ever going to get to this one. I bought a 78 New Yorker 440/auto as a donor car...120km and runs great. Both cars are sold together at this price. I will sell seperately if need be. This is a project car but there are virtually no 61 Plymouths around and this is a very rare car.Rolls and steers and can be pushed easily. I have tons of photos but I will NOT send anymore pictures unless we have spoken on the phone and you are interested. $1500 or best offers"
http://victoria.en.craigslist.ca/cto/2972808665.html - $1100
"1961 Plymouth Belvedere Parts Car/Project Car
Car has Rust.
Could the car be restored? Maybe with the right person with a welder.
I just don't have the time.
I took the wiring harnes out of the steering column for my other car.
Lots of good parts.
225 Slant Six (Runs Good)
Push button 3 speed (needs rebuilding)
All chrome/stainless is there.
Rear bumber, good driver
Front bumber, needs rechrome
All Interior is there.
Original Tube AM Radio in working condition.
3 year old tires/rims. 245/50R16's American Racing Torque master II's
rebuilt gas tank, 3 yrs ago
3 year old shocks, rears are cargo coil springs
Front brakes cylinders/pads/flex lines/master cylinder/wheel bearings were all done 3 years ago. Rear pads are done but the wheel cylinders are no good.
Rebuilt starter.
I drove it here from Saskatoon 3 years ago and the transmission let go a few day's later and it has been parked since. Like I said it has rust"
http://vancouver.en.craigslist.ca/rds/cto/2989542918.html - $1500
"1961 Plymouth Belvedere 2drht, no motor or trans [factory 6cyl push button auto], mostly complete minus motor and tranny, solid body, minimal rust in lower quarters and fenders, floors rusted out but trunk and frame are good, all glass is good,all trim is there...some in great shape some not, all interior part are there, seats need reapolstering but door panels are in good shape. I bought the car a few years back with the intent on hot rodding it but due to other projects I dont think Im ever going to get to this one. I bought a 78 New Yorker 440/auto as a donor car...120km and runs great. Both cars are sold together at this price. I will sell seperately if need be. This is a project car but there are virtually no 61 Plymouths around and this is a very rare car.Rolls and steers and can be pushed easily. I have tons of photos but I will NOT send anymore pictures unless we have spoken on the phone and you are interested. $1500 or best offers"
http://victoria.en.craigslist.ca/cto/2972808665.html - $1100
"1961 Plymouth Belvedere Parts Car/Project Car
Car has Rust.
Could the car be restored? Maybe with the right person with a welder.
I just don't have the time.
I took the wiring harnes out of the steering column for my other car.
Lots of good parts.
225 Slant Six (Runs Good)
Push button 3 speed (needs rebuilding)
All chrome/stainless is there.
Rear bumber, good driver
Front bumber, needs rechrome
All Interior is there.
Original Tube AM Radio in working condition.
3 year old tires/rims. 245/50R16's American Racing Torque master II's
rebuilt gas tank, 3 yrs ago
3 year old shocks, rears are cargo coil springs
Front brakes cylinders/pads/flex lines/master cylinder/wheel bearings were all done 3 years ago. Rear pads are done but the wheel cylinders are no good.
Rebuilt starter.
I drove it here from Saskatoon 3 years ago and the transmission let go a few day's later and it has been parked since. Like I said it has rust"
There are a few up here in Canada for sale right now, in BC.
http://vancouver.en.craigslist.ca/rds/cto/2989542918.html - $1500
"1961 Plymouth Belvedere 2drht, no motor or trans [factory 6cyl push button auto], mostly complete minus motor and tranny, solid body, minimal rust in lower quarters and fenders, floors rusted out but trunk and frame are good, all glass is good,all trim is there...some in great shape some not, all interior part are there, seats need reapolstering but door panels are in good shape. I bought the car a few years back with the intent on hot rodding it but due to other projects I dont think Im ever going to get to this one. I bought a 78 New Yorker 440/auto as a donor car...120km and runs great. Both cars are sold together at this price. I will sell seperately if need be. This is a project car but there are virtually no 61 Plymouths around and this is a very rare car.Rolls and steers and can be pushed easily. I have tons of photos but I will NOT send anymore pictures unless we have spoken on the phone and you are interested. $1500 or best offers"
http://victoria.en.craigslist.ca/cto/2972808665.html - $1100
"1961 Plymouth Belvedere Parts Car/Project Car
Car has Rust.
Could the car be restored? Maybe with the right person with a welder.
I just don't have the time.
I took the wiring harnes out of the steering column for my other car.
Lots of good parts.
225 Slant Six (Runs Good)
Push button 3 speed (needs rebuilding)
All chrome/stainless is there.
Rear bumber, good driver
Front bumber, needs rechrome
All Interior is there.
Original Tube AM Radio in working condition.
3 year old tires/rims. 245/50R16's American Racing Torque master II's
rebuilt gas tank, 3 yrs ago
3 year old shocks, rears are cargo coil springs
Front brakes cylinders/pads/flex lines/master cylinder/wheel bearings were all done 3 years ago. Rear pads are done but the wheel cylinders are no good.
Rebuilt starter.
I drove it here from Saskatoon 3 years ago and the transmission let go a few day's later and it has been parked since. Like I said it has rust"
how about a 61 ragtop nice driver stock v8 motor
Naw, I keep forgettin my damn camera. Gonna hang it on the doorknob tonight. lol
GTSDustin
Well-Known Member
Haha Good idea! I know how that is!
pauly v.100
Well-Known Member
Currently on Ebay...
http://cgi.ebay.com/ebaymotors/1961...6408811?pt=US_Cars_Trucks&hash=item27c6a4b9eb
http://cgi.ebay.com/ebaymotors/1961...6408811?pt=US_Cars_Trucks&hash=item27c6a4b9eb
GTSDustin
Well-Known Member
Damn...Good deal. But Im too late! lol
GTSDustin
Well-Known Member
I guess your a good liar...or forget alot.
DusterKrazy
Well-Known Member
Here is one from last weekend's show. They make cool rides!!
I do in fact forget a lot. It's part of my disability. What's you're excuse for being a butthole? The car is located in Milledgeville, Georgia. I see it almost everyday. You're welcome to come see it, too and if you still think I'm a liar at that time, we can discuss that as well.
- Status
-
