Was in FelPro gasket kit????

[Mojoe9955]

This came in a bag in the gasket kit.
What is it?

 

[ProjectBazza]

Looks like a Speedi-Sleeve for the harmonic balancer.

 

[toolmanmike]

Looks like a Speedi-Sleeve for the harmonic balancer.

Yep!

 

[Mojoe9955]

Hmmm, always something.
I'm "rebuilding" my motor, so I clean the damper, add the red stuff ad press in the sleeve?
Do I need it?
Thanks

 

[Icetech]

Hmmm, always something.
I'm "rebuilding" my motor, so I clean the damper, add the red stuff ad press in the sleeve?
Do I need it?
Thanks

only if your balancer has a groove worn where the old seal ran for years.. if it's smooth emory it/clean it up and run it..

 

[Mojoe9955]

Torque converter or damper?

 

[Icetech]

Torque converter or damper?

Damper, sorry Those sleeves are a great thing if you need em

 

[Icetech]

Didn't realize i wrote converter... i have my transmission on my mind today

 

[Uncle Bob]

I've got some mystery gaskets too - my kit came with what looks like stamped steel intake gaskets - maybe for cast iron intakes - as a bonus I got three of them in the kit.

There's also some unknown round thick gasket kind of shaped like a donut

 

[Bad Sport]

There's also some unknown round thick gasket kind of shaped like a donut

Is it a felt washer type thing? If so that goes over the crank snout after you get the timing cover on and befor the balancer. I believe it is to keep grit and dirt from getting to the seal

 

[Uncle Bob]

Is it a felt washer type thing? If so that goes over the crank snout after you get the timing cover on and befor the balancer. I believe it is to keep grit and dirt from getting to the seal

No it's not that big. IIRC it's cork.

 

[Mojoe9955]

Kinda

 

[Uncle Bob]

There's also some unknown round thick gasket kind of shaped like a donut

This is it

 

[JDMopar]

This is it

View attachment 1716143861

If you have a 90 degree oil filter adapter, that goes between the adapter and the block. That big ol bolt that holds the adapter on goes thru it.