[SOLD] Weiand Intake Edelbrock Carb

[chargerjoe68]

I have a a Weiand 8007 dual plane intake for a 318/340/360 Has 1 inch adapter
$175 OBO
Edelbrock 1400 600CFM carb works good
$125 OBO
Located in Eastern Ohio

View attachment 1715424602

View attachment 1715424603

View attachment 1715424604

 

[rumblefish360]

Joe, is that Weiand a spread or square bore intake.

That TQ is a good one.

 

[chargerjoe68]

Joe, is that Weiand a spread or square bore intake.

That TQ is a good one.

Spreadbore

 

[chargerjoe68]

Joe, is that Weiand a spread or square bore intake.

That TQ is a good one.

Why is the carb so good?

 

[rumblefish360]

Large primary
Lack of vacuum attaching points, only PVC & spark advance nipples up front.
I can’t see the rear of the carb for vacuum points except the pull off which they all must have.

That carb on the Weiand with the proper thick TQ gasket (approximately 1/4 inch) should be a reallllly good street performer. Deep port match that intake for the icing on top. Ooo! Yea, yummy.

 

[krazykuda]

Joe, is that Weiand a spread or square bore intake.

That TQ is a good one.

The action plus 8007 is spread bore...

Weiand 8007WND Weiand Action +Plus Intake - Chrysler Small Block V8