Weld-up Header Kit

-
7

72Dart440

Member
Joined
Jan 28, 2012
Messages
6
Reaction score
0
Location
Oklahoma
I've been looking around trying to find headers to put on my 72 Dart Swinger. There isn't much room under the hood seeing as there is a 440 sitting there. Anyone know of a good Weld-up kit that would work?
 
You will pay has much for a weld up kit as you will a bolt on,there is a chance to find some used ones like I did from a member on for 400 bucks.:blob:
 
i doubt any of the weld up kits would be an easy build,they are usualy more oriented to fit tubechasie cars,but they are a good asortment of bends and with the right flanges and collectors,i think one of those kits could be a good start if you are a good fabricator and dont mind ordering a few more bends to get your headers finnished.
 
If you are not a drinking man, by the time you get enough of the weld up header kit you will be. LOL. As stated above, you are better off with TTI's, or Schumacher's. Unless you are a "great" fabricator, the kits are a PITA. JMO.

Bill S.
 
Those will probably work, but they are short tube headers. I'd run them on a street car, but not my race car. I hope it all works out for you.

Bill S.
 
You must log in or register to reply here.
-

Back
Top