What alloy brake master cylinder are people using?

[Bakerlite]

I'm doing a disc conversion on my Dart. It has drums on the rear. I want to use the alloy type of MC with a conversion plate.
I'm looking at this one NM-1822
http://www.autozone.com/autozone/pa...2&fromString=search&isSearchByPartNumber=true

Just wondering what others have used.

 

[Bakerlite]

I've found a 15/16 alloy bodied M/C. The one I've listed is 1 1/32. I'll try the 15/16 first, I just don't want it to go half way to the floor before is clamps hard on the discs, due to the smaller bore size.

 

[jaws]

Thats the one I run. Mine was out of an 88 Gran Fury cop car.

 

[Bakerlite]

The 15/16 is listed for the 1986 Ford Bronco. I will have to change the fittings at the MC but I'm doing new lines so that's not a problem.
Stock 68 dart MC port sizes are:
0.5 - 20
0.562 - 20
.
.
bronco one is:
0.437 - 24
0.562 - 18