73Scamp318
Well-Known Member
The plan is at this point to replace the cam that's in there either this fall or next spring and see where we wind up. I have to agree that just about anything that isn't an Edelbrock cam will be better. I've gotten recommendations from Comp, Bullet, Lunati, and I'm waiting on one from Howards.
Here are the recommendations I've gotten so far:
Comp: 20-228-4
Adv Dur: 285/297
Adv Lift (1.5 rockers): .545/.545
Lobe Lift: .364/.364
.050 Dur: 241/247
LSA: 110
ICL: 106
Bullet: CRA 290/298-H9+5
Adv Dur: 290/298
Adv Lift (1.5 rockers): .510/.510
Lobe Lift: .340/.340
.050 Dur: 240/250
LSA: 109
ICL: 104
Lunati: 10200704 (60403)
(couldn't find the lobe lift specs, so I just divided the adv lift by 1.5)
Adv Dur: 276/284
Adv Lift (1.5 rockers): .513/.533
Lobe Lift: .342/.355
.050 Dur: 234/242
LSA: 110
ICL: 106
Thanks to all for the input.
Here are the recommendations I've gotten so far:
Comp: 20-228-4
Adv Dur: 285/297
Adv Lift (1.5 rockers): .545/.545
Lobe Lift: .364/.364
.050 Dur: 241/247
LSA: 110
ICL: 106
Bullet: CRA 290/298-H9+5
Adv Dur: 290/298
Adv Lift (1.5 rockers): .510/.510
Lobe Lift: .340/.340
.050 Dur: 240/250
LSA: 109
ICL: 104
Lunati: 10200704 (60403)
(couldn't find the lobe lift specs, so I just divided the adv lift by 1.5)
Adv Dur: 276/284
Adv Lift (1.5 rockers): .513/.533
Lobe Lift: .342/.355
.050 Dur: 234/242
LSA: 110
ICL: 106
Thanks to all for the input.
