HemiMark
Well-Known Member
I cant remember what goes in these firewall holes! One above the master cylinder and the other to the right of the master but under the lip? any pics and help would be appreciated.
what goes here!
- Thread starter HemiMark
- Start date
-
The one just above and a little off to the side of the MC is the speedo cable hole on my 67 Cuda. Not sure about the other one! Geof
What car?
top one is washer hoses
if variable/3 speed it is a plug
if variable/3 speed it is a plug
rob_robinson87
Well-Known Member
Use my assembly photos on my website for reference! Keep in mind that there were several holes that varied per option. Tach and/or performance gauge got another hole than the base models. They were drilled in a dimple to the left of those holes . 67, 68, 69 drilled either the top dimple or the bottom dimple to pass the wiring/vacuum hose through. I drilled mine for my tach I added.
rob_robinson87
Well-Known Member
By the way, left hole- speedo cable. Right hole, washer hoses/grommet, or just grommet if you don't have a foot pump.
HemiMark
Well-Known Member
Sorry, this is a 1971 dodge Demon or Duster...... speedo cable! one down one to go
HemiMark
Well-Known Member
yellow is speedo cable
The red circled hole is for the parking brake cable....
straightlinespeed
Sometimes I pretend to be normal
Yes, the upper right hole is for the foot pump washer hose. Lower left is for the speedo cable. So I concur with everyone else. LOL
HemiMark
Well-Known Member
if there is no pump does it get blocked off?
straightlinespeed
Sometimes I pretend to be normal
I removed my foot pump and bought a body plug that fit that hole. Sorry I cant recall the size.
HemiMark
Well-Known Member
Thank you everyone.......... thanks straight!
-
